back spacing help
#1
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: Pembroke pines
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
back spacing help
i am having some trouble trying to figure out what offset to get for my car, i narrowed the rear 10". 5" on both sides. i need to buy the wheels for it but i am not 100% sure what offset to get. i am thinking either a 15/10 3.5bs or a 15/12 4"bs
or better yet what is the best way i can figure out the back spacing?
the tire is going to be a M/T 315/60
or better yet what is the best way i can figure out the back spacing?
the tire is going to be a M/T 315/60
#2
On The Tree
Join Date: Dec 2007
Location: Shawnee, Ks.
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Put a large straight edge across the axle/brake hat/etc. where the wheel mounts, called the wheel flange, and measure backwards, in an arc to the first thing that will hit to give you the available space. Subtract needed clearances from inner fenders, chassis and frame tubes, don't forget to figure in tire bulge/growth and you should be close to what you need. Measure it yourself, just to be safe.