6 point rollbar question?
Thread Starter
11 Second Club
iTrader: (27)
Joined: Jul 2008
Posts: 905
Likes: 2
From: kittanning,pa
6 point rollbar question? which sponsor on here sells a good rollbar?im planning on running mid to low 10s,should i go with bolt in or weld in?,i want to be track legal,nhra/ihra.
Weld in! Most shops will probably want to just make one for your car and not install someone else's. If your doing it yourself I've heard mostly good things about Wolfe. I have an S&W but haven't installed it yet. If you can afford it and weld it go for the moly. Also if your planing on low 10's you may want to consider a 10 point, unless it's mostly a street car, accident+halo bar+ no helmet=no good!
6 pt from Wolf, weld or bolt will be good to 9.99. I just received my moly, 6 pt, weld in from Wolf and it looks darn good. We have an S&W in Bob's car and the door bars don't give you the clearance that a Wolf's does.
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
Nope, bolt in will work.
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
I had a used bolt in wolfe 6point and was happy with it. I changes it for a weld in wolfe 6point, spent alot of money on it with there shipping and everything ready to go. All notched, and fitted. But it was WAY off, and spent a ton of time fitting it. Taking it to a local chassis shop to have parts re bent, bars cut down 1/2 inch off there fit jig notches. I was very unimpressed with it, and its not gona be 100% "right" fitting form having to work with what I had. It would have been faster and cheaper for me to have the local shop make one over. Check it out here,
https://ls1tech.com/forums/drag-raci...ch-diet-2.html
check with your local shops, I think your near PAF thats a sponcor on here. I've seen some nice stuff on here form them.
https://ls1tech.com/forums/drag-raci...ch-diet-2.html
check with your local shops, I think your near PAF thats a sponcor on here. I've seen some nice stuff on here form them.
Thread Starter
11 Second Club
iTrader: (27)
Joined: Jul 2008
Posts: 905
Likes: 2
From: kittanning,pa
11 Second Club
iTrader: (32)
Joined: Jan 2006
Posts: 3,701
Likes: 2
From: Southaven, MS (near Memphis, TN)
My 6pt chromoly rollbar installed was $743 plus tax which brought it to right at $800. On Wolfe's website, it says $875 for a Bolt-in Chromoly rollbar. And that isn't even including freight.
the weld in is only like 485 is why i said that.
800 is a good price on a moly bar installed.