Need help lauching my car!
Thread Starter
Launching!
iTrader: (8)
Joined: Jul 2006
Posts: 292
Likes: 0
From: San Jose Bay Area!!
Need help lauching my car! Whats the best Rpm to do it at? im geting my 9' installed this weekend with Qa's shocks torque arms lower controls arms and 315/35/17 Mts in the back havent really launch my car that hard since i was too afraid with having a ten bolt now dont have to worry about that any suggestions thanks
You're going to have a real hard time hooking consistently on a short sidewall drag radial with a 6 speed. I couldn't even get 325/50/15 m/t drag radials to do very well on my car.......either blew the tires away or wheel hopped at anything higher than 3000rpm.......switched to 28x12.50 et streets and now the car bogs at anything under 5000rpm.
Not saying it can't be done, just isn't easy.
Not saying it can't be done, just isn't easy. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
