Another new best!! Stock cubic inch Camaro SS 10.68 @ 124 MPH !!
12-08-2003, 01:48 PM
#21
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
I'm running the same intake, fuel rails and injectors that came with my car. I believe they are 26 lb injectors.
The last time I dyno'd my car it put down 404 RWHP/445 RWTQ, but I have done numerous tuning adjustments at the track and have picked up ET. I would like to re-dyno sometime soon and see what its at now.
The TR H/C is a good setup, very reliable. I drove with my 230/224 cam everyday on the streets up until a few months ago when I bought my Tahoe. Now my car chills in the garage with the slicks on full time. I just load the car on the trailer and go racing. I used to drive to the track and change tires before I bought my truck. That sucked! Especially when you drive there change tires then get rained out. You have to change the tires back in the rain/mud to drive home.
The last time I dyno'd my car it put down 404 RWHP/445 RWTQ, but I have done numerous tuning adjustments at the track and have picked up ET. I would like to re-dyno sometime soon and see what its at now.
The TR H/C is a good setup, very reliable. I drove with my 230/224 cam everyday on the streets up until a few months ago when I bought my Tahoe. Now my car chills in the garage with the slicks on full time. I just load the car on the trailer and go racing. I used to drive to the track and change tires before I bought my truck. That sucked! Especially when you drive there change tires then get rained out. You have to change the tires back in the rain/mud to drive home.
12-10-2003, 07:34 AM
#25
Restricted User
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
2002's have 28.8# injectors...
What converter and gears do you have? I pulled a best of 1.494 60' with a 4400 and 3.73's. I swtched to 4.11's and a Wolfe Sway Bar hoping to get into the low 1.4 range. I am planning to bump the tires up from 26's to 28's...
What converter and gears do you have? I pulled a best of 1.494 60' with a 4400 and 3.73's. I swtched to 4.11's and a Wolfe Sway Bar hoping to get into the low 1.4 range. I am planning to bump the tires up from 26's to 28's...
...I love seeing those kinds of ET's with less than the 440+ ringer motors. Congrats on your 60's... job well done! 
