Help Relocating Front Fuse Block

Reply Subscribe

Thread Tools

Search this Thread

Jan 8, 2010 | 06:02 PM

#41

GhostofKrypton

On The Tree

iTrader: (7)

Joined: Mar 2008

Posts: 113

Likes: 0

From: Tucson, AZ

not really the fuse box, but that is next on my list. Rewired my pcm and tucked it inside and ran my wires like the wire mod, under the fender.

Jan 8, 2010 | 07:52 PM

#42

y2k_ta

'Bird Director

iTrader: (80)

Joined: Dec 2001

Posts: 12,829

Likes: 30

From: Central Indiana Honors: 4th grade spelling bee contestant

Quote:

Originally Posted by MrElectric03

Do you have any pics? That just came to mind sounds like a clean setup.

This is temporary. I am going to fab up a more secure bracket to mount the pcm to the car. The fuse block is to the left and behind the pcm (not shown in photo).

Attached Thumbnails

Help Relocating Front Fuse Block-100-0008_img.jpg

Help Relocating Front Fuse Block-100-0014_img.jpg

Help Relocating Front Fuse Block-100-0017_img.jpg

Jan 11, 2010 | 09:14 PM

#43

MrElectric03

TECH Fanatic

iTrader: (71)

Joined: Dec 2007

Posts: 1,885

Likes: 1

From: Southern California

Quote:

Originally Posted by y2k_ta

This is temporary. I am going to fab up a more secure bracket to mount the pcm to the car. The fuse block is to the left and behind the pcm (not shown in photo).

Nice, I like it.

Jan 17, 2010 | 11:30 PM

#44

XpEdItIoUs

10 Second Club

iTrader: (44)

Joined: May 2004

Posts: 1,658

Likes: 0

From: Phoenix, AZ

I have mine mounted inside where my hvac was

It cleaned up my engine bay

Jan 31, 2011 | 05:17 PM

#45

MUSTANGBRKR02

12 Second Club

iTrader: (91)

Joined: Aug 2006

Posts: 4,599

Likes: 5

From: Maine

Anyone finish theirs? I am starting mine now.

Jan 31, 2011 | 05:50 PM

#46

studderin

TECH Senior Member

iTrader: (28)

Joined: Nov 2005

Posts: 5,556

Likes: 6

From: Rochester, NY

I only have 1/2 the wires now that I went thu everything and depined unused stuff. I have a box full of wire, and a bog full of the old tape and loom. Put the PCM, 2step, and underhood fues inside the dash. Not all done yet, it looks a lot beter.

I wouldn't just put the fuses in that hole, so there end the front wheel well plastics. Ive done some swap cars were we did that. And ended up having alot of problems form them getting rusted mounted upside down. They were not form getting wet driving the car in the rain or anything, just form being mounted inside down. The littlest bit to moister dose a lot of damage.