Estimated HP....Tips????
Thread Starter
Registered User
Joined: Jan 2010
Posts: 5
Likes: 0
Estimated HP....Tips???? Looking for someone who might have a simular set up, was wondering what kind of HP I could expect to see out of the motor I just built. Still sitting on the engine stand, going to be a little be before it is installed. If anyone has any idea's on what I could do to make some more power just throw it out there....looking for idea's.
Here's what's in it:
Chevy 350 bored .060
Stock bottom end
Speed pro .100 dome pistons
Comp Cam Solid lift Cam (495/495 lift, 235 duration)
Procomp heads (2.05, 1.65 valves, 64cc)
1.6 roller rockers
High rise intake
Headers
65K distributor
850 Double pumper (edelbrock in pic isn't going on it)
Here's what's in it:
Chevy 350 bored .060
Stock bottom end
Speed pro .100 dome pistons
Comp Cam Solid lift Cam (495/495 lift, 235 duration)
Procomp heads (2.05, 1.65 valves, 64cc)
1.6 roller rockers
High rise intake
Headers
65K distributor
850 Double pumper (edelbrock in pic isn't going on it)
