408ci 88mm turbo Camaro Drag Build
#21
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Sep 2008
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Got a chance to do a little work today.I installed the battery relocation bracket,kill switch,and circuit breaker.
Also made a block off plate to mount my rocker switch panel,a few gauges,and the window switches.Needs a little more trimming around the edges and then I will cover it.
Also made a block off plate to mount my rocker switch panel,a few gauges,and the window switches.Needs a little more trimming around the edges and then I will cover it.
#23
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Sep 2008
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Have a few udates
Mounted the fuel cell in the trunk
Also installed dhm fabrication cf door panels
Installed dhm fabrication steering column
Made a plate for the window switches and turn signal switches
And installed rocker panel switches
Mounted the fuel cell in the trunk
Also installed dhm fabrication cf door panels
Installed dhm fabrication steering column
Made a plate for the window switches and turn signal switches
And installed rocker panel switches
#26
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Sep 2008
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Well some parts have started coming in.I went and picked my power glide and neal chance convertor from the transmission shop the other day.Ordered a flywheel but the wrong came in so have the right one coming.My bmr crossmember came in.
Went to my buddies shop to day to pick up my cam,lifters,timing chain,and oil pump
Also picked up some of his old gauges,FAST setup,and ATi balancer
My midplate also showed up from Madman so I can start assembling the car.
Still waiting on heads and rocker arms.Maybe soon it will run.....
Went to my buddies shop to day to pick up my cam,lifters,timing chain,and oil pump
Also picked up some of his old gauges,FAST setup,and ATi balancer
My midplate also showed up from Madman so I can start assembling the car.
Still waiting on heads and rocker arms.Maybe soon it will run.....
#29
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Sep 2008
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Well more parts arrived so I can start assembling the engine and putting it in the car eventually.
Front plate,mid plate and solid trans mount
Power glide,tci flexplate,neal chance convertor,lokar dipstick tube
Speed inc valve covers,arp head studs,and meziere water pump
Yella terra rockers
Trick flow 235 cnc heads
Front plate,mid plate and solid trans mount
Power glide,tci flexplate,neal chance convertor,lokar dipstick tube
Speed inc valve covers,arp head studs,and meziere water pump
Yella terra rockers
Trick flow 235 cnc heads
#31
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Sep 2008
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
It is setup to run an alt on either side depending on how you have your exhaust setup.
#38
Good looking build, I like all the custom work. Whats the plan for the car all out race or some street time too?
Can't wait to see what that 408 does with the 88 on the track, everyone says 408 is to big for a 88 in a dedicated race app but I want to see if it works.
Can't wait to see what that 408 does with the 88 on the track, everyone says 408 is to big for a 88 in a dedicated race app but I want to see if it works.