copperlanch

iTrader: (8)

i just changed my complete set up i need a little help on gear selection,my engine is a forged 347 prc stage 2.5 5.3 heads tsunami cam on a 112 makes power from 2200 to 6600 .WENT FROM AUTO to 6 speed im gonna spray a 200 shot, the car weights 3400lbs,will b on a 28 inch tire

thanks

MikeG

iTrader: (33)

4.56 all the way.

copperlanch

iTrader: (8)

with a six speed on a 200 shot lol id b bangin 6th texas speed said 390s on the spray if not then 4.10s i dont really no just seein what u guys were doin

01SS99red

iTrader: (6)

I agree 4.56 with a M6 even on the juice if your only planning on running th 1/8th. 4.30 if you plan on 1/4

copperlanch

iTrader: (8)

ya thers no 1/4 mile down here

Randy WS6

iTrader: (69)

I runned 4:30's when i had my M6 and i loved it , But now with the 4l80 & my Circle-D 4800 stall and the 4:30's are grate also., Mt tires are Hoosier 335/35/17's DR.

slolt1

iTrader: (75)

put you some 273s in there buddy you want have to shift at all! ha ha

SS4Luck

iTrader: (10)

my cam only ms4 w/ 410s was going through the traps limiter in 3rd in the 1/8th, but i assume youll be running alot faster than me. Id go 430s to help it out of the hole but thats me

93sspcoupe

430s and a 28inch tire should be perfect imo. and why the change to the six speed? and auto with your mods will run faster than a sixspeed, especially in the 8th

copperlanch

iTrader: (8)

i wanted a change it had a th350 in it an it just wasnt no fun to drive

JL ws-6

iTrader: (50)

I'd have gone with a gherico tranny before putting an M6 in it if you wanted to shift... that t56 isn't gonna be happy for long if you're racing alot.

copperlanch

iTrader: (8)

yeah in thats kinda what i was thinkin it will proble go bach th350 or 400 in a couple months