1nastyss

iTrader: (12)

I'm wanting to go with the msd 2 step, just want to know if there are any problems powershifting with it, any particular way you have to wire it? Let me know fellas

WhiteLTone

iTrader: (18)

if you wire the two step up to a button on the steering wheel, say a momentary contact button that is on when pressed, the two step will only be active while holding the button therefore as long a your not hitting the button while going down the track it will have no effect on anything.

Zmg00camaross

iTrader: (11)

Since your a M6 I would hooked it to the clutch switch and works great that way.

SlickVert

iTrader: (5)

After the launch the 2 step does not have any more function. Your rev limiter will be the high rpm limit when you are power shifting.

jmm98LS1

iTrader: (28)

MSD two step here and no problems power shifting. I wired mine to the starter safety switch, so when you power shift and just stab the clutch quick the pedal doesn't go down far enough to trigger the 2 step.

1nastyss

iTrader: (12)

Gotcha , thanks fellas

studderin

iTrader: (28)

LPE on the clutch switch. works great WOT