New X275 Build
02-13-2012, 07:58 AM
#182
Smith,
odd question:
What is your ride height in the rear? fenderlip to ground? Also, what TA are you running and what kind of clearance are you seeing with the crossbrace on the 25spec floor? We are putting together my Torque arm this week and these are the two we are trying to sort out. You can send to me in PM if you'd rather?
odd question:
What is your ride height in the rear? fenderlip to ground? Also, what TA are you running and what kind of clearance are you seeing with the crossbrace on the 25spec floor? We are putting together my Torque arm this week and these are the two we are trying to sort out. You can send to me in PM if you'd rather?
02-13-2012, 08:31 PM
#183
8 Second Club
Thread Starter
iTrader: (3)
Join Date: Sep 2003
Location: South Hill, Va
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Smith,
odd question:
What is your ride height in the rear? fenderlip to ground? Also, what TA are you running and what kind of clearance are you seeing with the crossbrace on the 25spec floor? We are putting together my Torque arm this week and these are the two we are trying to sort out. You can send to me in PM if you'd rather?
odd question:
What is your ride height in the rear? fenderlip to ground? Also, what TA are you running and what kind of clearance are you seeing with the crossbrace on the 25spec floor? We are putting together my Torque arm this week and these are the two we are trying to sort out. You can send to me in PM if you'd rather?
02-14-2012, 06:12 AM
#185
TECH Resident
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Smith,
odd question:
What is your ride height in the rear? fenderlip to ground? Also, what TA are you running and what kind of clearance are you seeing with the crossbrace on the 25spec floor? We are putting together my Torque arm this week and these are the two we are trying to sort out. You can send to me in PM if you'd rather?
odd question:
What is your ride height in the rear? fenderlip to ground? Also, what TA are you running and what kind of clearance are you seeing with the crossbrace on the 25spec floor? We are putting together my Torque arm this week and these are the two we are trying to sort out. You can send to me in PM if you'd rather?
bob
02-14-2012, 06:33 AM
#186
every car is different ,the mounts the locations the brackets all make it different from car to car. the bar locations so about the only thing that could be the same would be ride hieght,all else doesnt matter unless you have every part he has and built the car the way we did.Even from car to car that we build they are not the same,the reason i say this ,is because you did'nt say what parts you where using and show any picts of your car. Your chassis guy or if you are doing it has to set car where you want it and do what it takes to get it there. bob
bobI am aware that parts are different, and the floor bracing and cage can be built about 500 different ways to still meet requirements, but having a community helps. It's possible i just like his ride height too.
Trust me, we'll do what it takes. He's done a good job of it so far!
02-25-2012, 10:40 PM
#187
Well Smith I wish it could've went better for ya but 4.90 for your 6th hit in the car is damn awesome.
I guess with those damn ford pro mods running .60's and .70's you will have to find some power in the 330' to out run them.
Good job though!
Both cars look AWESOME, seriously you have two of the most sexiest cars on the property.
I guess with those damn ford pro mods running .60's and .70's you will have to find some power in the 330' to out run them.
Good job though!
Both cars look AWESOME, seriously you have two of the most sexiest cars on the property.
02-26-2012, 08:34 AM
#188
8 Second Club
Thread Starter
iTrader: (3)
Join Date: Sep 2003
Location: South Hill, Va
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
That was the 2nd full pass was the 4.90. The first pass I lifted early and went a 5.46 then the next pass the throttle cable broke. For the 3rd pass I ran it all the way thru the first time for a 4.98 then the 4th and final pass was a 4.90. I'm very happy for the first time out especially not knowing what I'm doing with it.
02-26-2012, 10:18 AM
#191
TECH Resident
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
That was the 2nd full pass was the 4.90. The first pass I lifted early and went a 5.46 then the next pass the throttle cable broke. For the 3rd pass I ran it all the way thru the first time for a 4.98 then the 4th and final pass was a 4.90. I'm very happy for the first time out especially not knowing what I'm doing with it.
02-27-2012, 09:46 AM
#197
TECH Resident
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
02-27-2012, 07:42 PM
#200
8 Second Club
Thread Starter
iTrader: (3)
Join Date: Sep 2003
Location: South Hill, Va
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
I really am for as little time as I have with it so far. It has really surprised me.
Highest I seen was 20.
Yes that was on the new mickey thompson.
I know what you mean. This car has almost surpassed my nitrous car in 2 full passes and my nitrous car has hundreds of passes.
Highest I seen was 20.
I know what you mean. This car has almost surpassed my nitrous car in 2 full passes and my nitrous car has hundreds of passes.