Drag Wheel setup
#1
Drag Wheel setup
I see a bunch of people running the Billet specialties Steetlites and the weld RT-S S71 wheels for a street/strip setup. I was looking at getting the Weld RT Series wheel, like the Vektor or Vitesse. It says these wheels are street freindly on their site, sooo my question is are more people going with the other wheels cause they just cost less? And are these gonna withstand street abuse like the other wheels?
Here are the wheels
Here are the wheels
#7
Post #136
15x9 5.5 BS 295-55-15
15x4 1.75 BS
Not sure about the Gold. Polished looks good..
Opinions?
http://www.turbobuick.com/forums/bra...-em-off-4.html
15x9 5.5 BS 295-55-15
15x4 1.75 BS
Not sure about the Gold. Polished looks good..
Opinions?
http://www.turbobuick.com/forums/bra...-em-off-4.html
Trending Topics
#8
i ended up getting the vektors 15x10 5.5bs and 15x4 295/55/15s MTs. I got the narrowed moser rear a while back but have trying to get my brake situation figured out. Goin with strange. Moser is sending me a new axle wth a different offset to clear the caliper mount so i dont have to run any spacers.
heres some pics.
heres some pics.
#11
Could you roll em over to the car, and at least pretend they are mounted and snap a few pics just to give us an idea?
I'm assuming the stock brakes fit? You putting the strange brakes on to lose weight?
Got any side view pics of the rear rims, cant really tell how the dish looks at that angle.
Got any side view pics of the rear rims, cant really tell how the dish looks at that angle.
#12
I bought the same wheels a few weeks ago. I am hoping they show up next week. I will get pics up asap. My buddy has nearly same MWC rear in his car that I have on order so it will be good comparsion.
#14
Car is just chillen in my small garage at my house. Moser shipped the axles so they should be here next week and i can get everything on the car during the weekend at our shop.
yea the stock brakes will work, idk about the rotors fitting over 5/8 studs though. And yup mostly for weight reduction and i dont have the e-brake anymore either.
yea the stock brakes will work, idk about the rotors fitting over 5/8 studs though. And yup mostly for weight reduction and i dont have the e-brake anymore either.