a good light weight TAN racing seat
11-23-2011, 08:11 AM
#1
TECH Apprentice
Thread Starter
iTrader: (17)
Join Date: Dec 2010
Location: Virginia Beach
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
a good light weight TAN racing seat i dont have 4-500 bucks for a seat, so i was looking at this one
http://www.summitracing.com/parts/SUM-G1159B-1/
i see it weigs close to the stock leather ones, was wondering if anybody has an idea about a light tan racing seat.
i would like tan to keep the color the same
http://www.summitracing.com/parts/SUM-G1159B-1/
i see it weigs close to the stock leather ones, was wondering if anybody has an idea about a light tan racing seat.
i would like tan to keep the color the same
11-23-2011, 04:12 PM
#3
yea thats probably about the best idea that JL posted. However, not a good idea to run a Kirkey if you don't have a cage to brace it against. Just what I've read around here more than a few times. I'd like to sit in one sometime to see if I will be able to daily drive it without too many complaints lol.
11-24-2011, 03:09 AM
#5
Kirkey or a Jaz seat, and have a tan cover made for it.. that would be your best bet I think.
You can paint the alum too if you don't want that look in the car. Plenty of people have done that over the years, it will give it more of a seat look if you're after that.
You can paint the alum too if you don't want that look in the car. Plenty of people have done that over the years, it will give it more of a seat look if you're after that.
