scary back and forth wobble at end of the 1/8th
#23
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: lancaster ny
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
The whole rear of the car sways side to side and points the front towards the wall, then the centerline causing me to have to compensate. I've only had one night of experience with this. I won't run them again till I can make a change to the setup.
#24
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: lancaster ny
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
99french, at 17 psi, I blow the tires off at the line. Thats the only reason I drop them down to such a low pressure. But, the sway did get worse as I decreased tire pressure.
#26
Launching!
iTrader: (7)
maybe soften the shocks some. but hows your 60'? it can be tricky launching a 6spd with a two step i know that much. i also know there was a world of difference between my trutrak and my locker traction wise, plus i broke the trutrak first time out with my two step. why not switch to a 15" wheel on the rear so you can have some more sidewall?
#27
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: lancaster ny
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Nope, pan hard bar is a spohn adjustable, it's fine and the axle is centered. I have the relocation brackets on my 9" also and the control arms are in the bottom hole. My shocks are on the softest setting. My 60' sucks to be honest. I bought the tires and wheels from a older guy on Craigslist with hardly any wear. I only ran them one night. My 60' is a best of 1.68 with those tires. 1.72 on drag radials. I am thinkin about switching to 15" rims for more sidewall. Just gotta come up with the dough.