Why won't it run hard on the backside?
12-18-2012, 05:12 PM
#61
Man. I don't get it. My Circle 2b is only about 2800 to 3000 stall yet I have had 60' times as low as 1.64. I would have to think you should be able to best my 60' times. Your intake has much better low end torque characteristics than my Victor Jr. My cam is a bit smaller and has more advance though. That helps me a bit.
12-18-2012, 07:41 PM
#62
with a 325 on the back, in an A-body with your power you should be able to hook on dirt. You need to work on your suspension get those shitty KYBs off there and get the *** down some.
Also i think your converter is the culprit here, I have witnessed a number of yank SS converters under perform, I had a SS3400 and it was complete garbage much like this, picked up 3mph changing it
Also for reference, this is my timeslip, stock 346, heads cam, 4.10s 295/65 M/t stock trans and a PTC 3800 1.8STR.
3400# 1 3/4 headers, 3" full exhaust and LS1 intake, stock throttle body
Also i think your converter is the culprit here, I have witnessed a number of yank SS converters under perform, I had a SS3400 and it was complete garbage much like this, picked up 3mph changing it
Also for reference, this is my timeslip, stock 346, heads cam, 4.10s 295/65 M/t stock trans and a PTC 3800 1.8STR.
3400# 1 3/4 headers, 3" full exhaust and LS1 intake, stock throttle body
