[/IMG] 
[/IMG] 
[/IMG][IMG]
[/IMG] 
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG] 
8 second build and 67 Camaro build
8 second build and 67 Camaro build I figured i have enough parts to start alittle build thread with two cars with totally different goals i have so here we are.
First car is a 98 Camaro that over the years has had 4 different motor set-ups and has been my baby since high school. Last motor was a ls3 with a Tsp cam and milled heads the car ran really good running 104 mph traps on motor and 113mph on a 150hit. I drove it to the track and home. A year ago it broke a rod and i have been figuring out my next build and buying parts off ls1tech to get it where i wanted.
My goals with this car will be to run low 9's and drive it home.
Second car is actually a family car that me,pops and my sister will be enjoying. 67 Camaro that has a 355 with a 4 speed. We where happy with the car until one weekend i went to a car show that was 60 miles away and it got really annoying with the 4 speed revving high and running 65 down the interstate and to put the icing on the cake i got out ran by a 91 gt with a cam on the way home.
First car is a 98 Camaro that over the years has had 4 different motor set-ups and has been my baby since high school. Last motor was a ls3 with a Tsp cam and milled heads the car ran really good running 104 mph traps on motor and 113mph on a 150hit. I drove it to the track and home. A year ago it broke a rod and i have been figuring out my next build and buying parts off ls1tech to get it where i wanted.
My goals with this car will be to run low 9's and drive it home.
Second car is actually a family car that me,pops and my sister will be enjoying. 67 Camaro that has a 355 with a 4 speed. We where happy with the car until one weekend i went to a car show that was 60 miles away and it got really annoying with the 4 speed revving high and running 65 down the interstate and to put the icing on the cake i got out ran by a 91 gt with a cam on the way home.
90% of the parts on these cars have been bought here on ls1tech.
As i started looking for another motor for my 98 Car as the Ls3 block was bad when the rod came apart i ran acrossed a add for a 408 on here, a deal was made with this member and i went and picked this motor up. As i was refreshing this motor it was decided this would not be the 98 cars motor i would put it in the 67 as i wanted to go faster with the 98 car. Well at that time i had seen another members car had got burned with the exact setup i was looking for the 98 Car.
As i started looking for another motor for my 98 Car as the Ls3 block was bad when the rod came apart i ran acrossed a add for a 408 on here, a deal was made with this member and i went and picked this motor up. As i was refreshing this motor it was decided this would not be the 98 cars motor i would put it in the 67 as i wanted to go faster with the 98 car. Well at that time i had seen another members car had got burned with the exact setup i was looking for the 98 Car.
First motor has
Arp main studs
Callies crank
Callies rods
Wiseco pistons 12.1
Solid roller .674 lift
1/2 head studs
Tfs 235's
Shaft mounts
Ported Vic jr.
N2o outlet direct port
Second motor
Arp main studs
Eagle crank
Eagle rods
Wiseco -8cc pistons
Comp 240/254 cam
Ls3 heads milled .020 lightly ported flowed 330ish
Arp head bolts
Ported Ls3 intake
NW 92mm Tb
N20 plate
Arp main studs
Callies crank
Callies rods
Wiseco pistons 12.1
Solid roller .674 lift
1/2 head studs
Tfs 235's
Shaft mounts
Ported Vic jr.
N2o outlet direct port
Second motor
Arp main studs
Eagle crank
Eagle rods
Wiseco -8cc pistons
Comp 240/254 cam
Ls3 heads milled .020 lightly ported flowed 330ish
Arp head bolts
Ported Ls3 intake
NW 92mm Tb
N20 plate
[IMG]
[/IMG][IMG]
[/IMG]I have a FTI Th350 manual valvebody with a brake going behind the big motor and the 67 has a built 6spd going in it.[IMG]
[/IMG[IMG]
[/IMG]0/b853ca5c.jpg[/IMG][/IMG]]
[/IMG][IMG][/IMG]I have a FTI Th350 manual valvebody with a brake going behind the big motor and the 67 has a built 6spd going in it.[IMG][/IMG[IMG][/IMG]0/b853ca5c.jpg[/IMG][/IMG]] Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
[/IMG][IMG]
[/IMG][IMG]
[/IMG] 
[/IMG] 
[/IMG][IMG]
[/IMG] 
Well the Trickflow headed motor made 686 hp on the engine dyno. And the Ls3 headed motor made 598 hp. Street car means I can jump in the car drive to a car show or to the track and drive home. And once a year I go to the Turkey Rod in Daytona and cruise the streets all weekend long without it breaking down.
I really have no goals with the 67 except to make it a nice cruiser. But I've been mid 6's in the 1/8 at 113mph in the black car so with 250 extra hp it should get down.