Brian Black's X275 TA Build at Midwest Chassis......
10-24-2012, 02:22 PM
#24
TECH Resident
iTrader: (46)
Join Date: Dec 2001
Location: Some where in the Corn Fields of Illinois
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
I kinda forgot about updating this thread since I am partially banned from this site 
Anyway, here are some of the one piece front end that Eric build, in process pictures....
Using factory bumper and fenders too
Mounting sleeve for the area near the back of the hood....
Anyway, here are some of the one piece front end that Eric build, in process pictures....
Using factory bumper and fenders too
Mounting sleeve for the area near the back of the hood....
Last edited by SMKN TA 95; 01-14-2013 at 09:37 AM.
10-24-2012, 02:31 PM
#25
TECH Resident
iTrader: (46)
Join Date: Dec 2001
Location: Some where in the Corn Fields of Illinois
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
More front end mounts finished up, fuel cell and radiator mount......
I knew we were getting closer when Eric wanted me to bring the engine down to do mockup and build a mid plate, air pan, new trans crossmember, realign motor plate mounts etc....
Also checked the fitment of my new KY Turbo 2.25" primary headers with a 4.5" collector......
I knew we were getting closer when Eric wanted me to bring the engine down to do mockup and build a mid plate, air pan, new trans crossmember, realign motor plate mounts etc....
Also checked the fitment of my new KY Turbo 2.25" primary headers with a 4.5" collector......
Last edited by SMKN TA 95; 01-14-2013 at 09:41 AM.
10-25-2012, 08:18 AM
#35
TECH Resident
iTrader: (46)
Join Date: Dec 2001
Location: Some where in the Corn Fields of Illinois
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Technically the car is done, painted, assembled, and raced...and yes all this was done prior to the LS Fest. The Fest was the first time out with the car this year. I didn't want any pics being posted of the car until it was done....
10-27-2012, 10:22 PM
#37
TECH Regular
Join Date: May 2011
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Have u got any pics showing how tight the mainhoop is to the chassis?
Anymore pics of the seat mounts and height etc?
I need more headroom with my wolfe cage kit, looking at cutting the floor to get more height, my kirky seat is basically touching the standard rear seat bolt platforms. So im as low as i can go.
Any help would be appreciated.
Anymore pics of the seat mounts and height etc?
I need more headroom with my wolfe cage kit, looking at cutting the floor to get more height, my kirky seat is basically touching the standard rear seat bolt platforms. So im as low as i can go.
Any help would be appreciated.
