Trying to get my 60 fts down! Best I have been able to do is 1.53 but normally 1.57 to 1.61. I have all the normal suspension mods and QA1 single adjustables all around. Weight is 1109 DF, 1040 PF, 825 DR and 846 PR. Shocks set at 0 on the fronts and 8 on the rears. MT ET SREETS 26 x 11.5 at 14.5 llbs. I used a Progressive with 0 delay and .2 ramp at 60% and flashing the converter on this run with a 1.57 60ft and 10.52 at 130 mph (620 rwhp on this set-up). I`d like to get my 60s down to 1.4s...any ideas


http://youtu.be/BgJ8hhxdz8s

 

Try loading it a little harder off the line may help are you transbrake or foot brake launching it?

 

I'm not preloading just wait for the last yellow and floor it! I'll try foot braking it to see if that hurts or helps. Thanks.

 

still coming out soft, ramp that **** in! bigger initial hit till it breaks or spins

 

Looks like it squats like a girl - I'd look at the rear control arm geometry.