question about how long to get from 1/8 marker to 1/4 mile marker
04-13-2004, 08:45 PM
#1
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Apr 2002
Location: Killa Cali
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
no gain on the top end? Old setup was 222/224 cam with bolt ons and stock converter.
new setup is 231/237 cam with PP stage II heads, electric water pump and hi-stall conveter.
before and after its taking me 4.3x seconds to get from the 1/8 mile marker to the 1/4 marker. i looked on the database and it looks right compared to other people running 11.8x but i was running that before at 12.2's
with the new cam, heads and hi-stall coverter so far ive gained .4 tenths. 2 tenths in the 60ft and the other .2 tenths by the 330ft mark, after the 330ft mark its taking me the sametime before and after. so the converter is doing its job.
i dyno'd 403 to the rear wheels on the new setup and around 375 on the old setup.
should i be worried? should i look for something? race weight is 3600
thanks!
new setup is 231/237 cam with PP stage II heads, electric water pump and hi-stall conveter.
before and after its taking me 4.3x seconds to get from the 1/8 mile marker to the 1/4 marker. i looked on the database and it looks right compared to other people running 11.8x but i was running that before at 12.2's
with the new cam, heads and hi-stall coverter so far ive gained .4 tenths. 2 tenths in the 60ft and the other .2 tenths by the 330ft mark, after the 330ft mark its taking me the sametime before and after. so the converter is doing its job.
i dyno'd 403 to the rear wheels on the new setup and around 375 on the old setup.
should i be worried? should i look for something? race weight is 3600
thanks!
Last edited by WicketMike; 04-14-2004 at 11:45 AM.
