New best at Cecil Co
Thread Starter
11 Second Club
Joined: Jan 2003
Posts: 179
Likes: 0
From: Bridgeport OH
New best at Cecil Co This weekend, I made a long trip to Cecil Co Draway for the American Iron Shootout.
Had some trouble with the N20 heater, would not heat. I ended up borrowing a heater off a friend, who broke the adapter on his bottle. Great friend, lets me cut out is heater so that I can use it. I'd say so.
Anyway. Last run of the day, bottle is up to pressure, nice and warm, everything is set.
R/T 0.112
60' 1.772
330 4.809
1/8 7.389
MPH 95.15
1000 9.635
1/4 11.538
MPH 118.51
My g/f got the run on vid.....
*WARNING*
not dial-up friendly
Right-click and save target as..for 11.53 vid
Had some trouble with the N20 heater, would not heat. I ended up borrowing a heater off a friend, who broke the adapter on his bottle. Great friend, lets me cut out is heater so that I can use it. I'd say so.
Anyway. Last run of the day, bottle is up to pressure, nice and warm, everything is set.
R/T 0.112
60' 1.772
330 4.809
1/8 7.389
MPH 95.15
1000 9.635
1/4 11.538
MPH 118.51
My g/f got the run on vid.....
*WARNING*
not dial-up friendly
Right-click and save target as..for 11.53 vid
Thread Starter
11 Second Club
Joined: Jan 2003
Posts: 179
Likes: 0
From: Bridgeport OH
And I did see my twin there yes! Looked good. As for hooking, I had to be a little easy and run 18lbs of air in the Nitto's to stay hooked, otherwise I went as far as doing a full up pedal to gain traction.
You had a good times I thought....wish I was sitting where you are now.
You had a good times I thought....wish I was sitting where you are now.
