11 SECOND CLUB INSIDE>>>>>>POLL
Much more info on my web page.
But here is a break down.
The pepper with !EGR, DR's , cutout , free air, !MAF 13.15 105.95 1.98
The pepper with my homemade ram air 13.16 107.xx 1.95
The pepper with an ASP pulley 12.95 107.07 1.94
The pepper with 3:42 gears and cut up silencer 12.67 109.39 1.892
"Timing Tricker", HPP3, very warm and humid outside 12.68 109.99 1.91
Vigilante 2800 stall, E.T. Streets, horrible air quality, very Hot! 12.68 107.01 1.765
Hollow Log, a serious head wind, air temp around 70 degrees...it finally cooled off! 12.42 108.36 1.704
Ported & Polish TB, polish MAF, No head wind, Good barometer 12.29 109.5x 1.680
Took out seats, short belt, panty hose mod, Great Weather 12.07 111.15 1.642
New Y-pipe with cats, poor weather, Manual Lock Up 11.97 112.68 1.62
Thanks John and Steve for your informative responses! <img src="images/icons/grin.gif" border="0"> hehehe. At least it looks like some people actually read this thread. <img src="images/icons/smile.gif" border="0">
Patrick G- do "ported heads and small cam" still count as bolt-ons? <img src="images/icons/wink.gif" border="0">
hmmm...I think I can get there w/o headers. Although, probably by the time I do everyone will be working their way to the tens! <img src="images/icons/shocked.gif" border="0"> Sucks that the Chicago Season is just about over...snow is in the forcast for this weekend. <img src="images/icons/frown.gif" border="0">
Trending Topics
The Best V8 Stories One Small Block at Time
I have TTS's
later, <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
Steve

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
1HoTTZ28 and LS1powerN20 - Technically, the TT, Hotcam, and Nitrous don't count. <img src="images/icons/grin.gif" border="0">
John- you are so impatient. <img src="images/icons/wink.gif" border="0">
Roy - Stop tempting me. <img src="images/icons/tongue.gif" border="0"> How much did you say those FLP's were? <img src="images/icons/wink.gif" border="0"> <img src="images/icons/smile.gif" border="0">
Jim - nothing is wrong with headers. I do want them. I am just all about trying to get the most out of my current setup b/4 throwing something else on. I know headers would get me to 11's, but I am not a "bing,bang, and you're done" type of girl. hehhe <img src="images/icons/wink.gif" border="0"> <img src="images/icons/grin.gif" border="0"> I like to take things nice and slow and see how each mod works for me and my car.
<strong>- Technically, the TT, Hotcam, and Nitrous don't count. <img src="images/icons/grin.gif" border="0">
</strong><hr></blockquote>
I would say technically that TT and nitrous would both be bolt-ons!
Loose the Sway Bar and better 60' should get you there <img src="images/icons/grin.gif" border="0">
[ November 28, 2001: Message edited by: BradWS6 ]</p>
<strong>
I would say technically that TT and nitrous would both be bolt-ons!</strong><hr></blockquote>
Jim, always pointing all the "technicalities"...LOL!
ok, technically i meant non power-adder. <img src="images/icons/tongue.gif" border="0"> <img src="images/icons/smile.gif" border="0">
Brad - 45 and sunny on Sunday?? hmmm...wonder where the guy that told me it was gonna snow this weekend got his information from. LOL! <img src="images/icons/tongue.gif" border="0"> <img src="images/icons/grin.gif" border="0"> He must been smoking some funny stuff. <img src="images/icons/wink.gif" border="0">
<strong>
pity party!!!!!!</strong><hr></blockquote>
ok...I pity da fool who needs a power-adder to beat my time. hehehhe <img src="images/icons/wink.gif" border="0"> <img src="images/icons/grin.gif" border="0">



