scotty2000ss

iTrader: (2)

I feel like I'm the only person who decided to go with the hellion cam in an ls1 (mods in sig) I've been researching what the best supporting mods will be and can't find too many threads.

So far I'm leaning towards porting my stock heads and eventually a fast 102. Anyone know what my end result will be. I spent a good amount on the cam and feel like the car should have way more.

madmike9396

iTrader: (29)

big cam don't equal fast car ! whats the specs on the cam and car ?

HCI2000SS

iTrader: (2)

What are the specs on that cam?

scotty2000ss

iTrader: (2)

244/248 .630 112.0
ARH w cats, stock intake on a 2000 SS

scotty2000ss

iTrader: (2)

I realize that. Just trying to finish the car up with the correct supporting mods. I'd like as much feedback as possible.

HCI2000SS

iTrader: (2)

Are you saying you already run that cam? I see no mods in your sig

scotty2000ss

iTrader: (2)

Yes. It's in the car now.

HCI2000SS

iTrader: (2)

Gotcha! That looks a lot like the T-rex cam and should do well in terms of all out performance with the right gear and supporting mods.

scotty2000ss

iTrader: (2)

Yea, that's what I was told. So I should see decent gains porting my stock heads and Fast combined with this cam.

HCI2000SS

iTrader: (2)

Definitely! Are you auto or stick? What gears are you running?

scotty2000ss

iTrader: (2)

M6 with 3:90s.

madmike9396

iTrader: (29)

Ported heads. Good intake good tune and good flowing exhaust should really wake it up

LS1rob00

iTrader: (9)

Agreed, and probably stepping up to a steeper gear as well.

HCI2000SS

iTrader: (2)

M6 with 3.90's is perfect in my opinion! Get some good compression out of the build and it will be a potent little combo!

studderin

iTrader: (28)

sounds like you have the setup in the 1st post. Check out this other local from high 11's to 10.0s hellion cam in a stock LS1, after supporting mods
https://ls1tech.com/forums/drag-raci...ld-thread.html

scotty2000ss

iTrader: (2)

Thanks. Just the information I was looking for. Definitely need to wake this sleeping dog cam up. New Era is 20 mins from me. Hopefully I can port the heads through a guy at work. If not I'll research another place.

scotty2000ss

iTrader: (2)

I'll most likely do that once I blow the rear end and upgrade to a strange.

studderin

iTrader: (28)

how do you like that cam? whats the mods, any track times?


i remember this too
https://ls1tech.com/forums/dynamomet...hp-395wtq.html

scotty2000ss

iTrader: (2)

It's growing on me. Sounds amazing. Right now the numbers are 377rwhp 340tq. The tq is low and I'm assuming it's because of the stock intake and heads. I have arh with cats and borla cat back. Best time was 12.7 at 112mph. Need to practice my launch more.

studderin

iTrader: (28)

stock tb? do you have a lid or underdriver pulley or anything?