When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's been a long time but here's a Quick update to this build went to the track last night and here are the results n/a and on a 200shot threw a nitrous outlet plate last time out went 10.26@131 on a 150 shot
An ugly looking car for sure. Outside of that, I don't care what that gains you, because if you are spraying the car you can gain more with a jet change then that will ever do for you.
Sorry just my opinion, I hate doing stuff that makes cars look bad for little to minimal gains.
An ugly looking car for sure. Outside of that, I don't care what that gains you, because if you are spraying the car you can gain more with a jet change then that will ever do for you.
Sorry just my opinion, I hate doing stuff that makes cars look bad for little to minimal gains.
Very helpful reply thanks a lot for taking your time to write your opinions which I can careless about. I'm not trying to build a pretty show car for other people's liking just trying to go as fast as I can with the budget I have. I have a billet grill cover that covers the bumper so you don't even see this for your info.
Nice times and it's running well for the mods on a budget. Ram air can be painted to be hidden if wanted. Have you removed or plugged it off at the track to see what kind of gains it's giving you?
Nice times and it's running well for the mods on a budget. Ram air can be painted to be hidden if wanted. Have you removed or plugged it off at the track to see what kind of gains it's giving you?
I just made the ram air a couple of days ago haven't been to the track yet
Quick update just ordered a umi drag bar and umi k member relocation the battery to the trunk and deleting the abs block should save a few pounds and leave straight as an arrow next time out plus did the ram air will keep y'all posted hoping for some 9.7-9.8s
Just finished the abs delete and added a purge valve witch this setup really needed next is swap the k member and install the drag bar work in progress
Well guys I went to the track last nite and made one motor pass picked .3 tenths and 4mph and bettered the 60ft by .1 this was after adding a umi drag bar umi k member and sux2bu ram air we also had better weather
Turned the kit on with a 200 and disintegrated the 10 bolt I went 1.4 60ft 10.00 @135 last time out guess it wasn't having it tonight Time for a 12 bolt 9ich
11-08-2015 | 05:15 PM
