Need Help Now!!!!!
#1
Launching!
Thread Starter
iTrader: (10)
Join Date: Oct 2003
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Need Help Now!!!!!
what would a N/A stock cubic inch LS1 auto with a trex cam, 4400 stall, 323 gear, ls6 intake with drags cutting a 1.6 60' run in the eighth and quarter? Would a 7.032@93 be reasonable? or would that have to be with nitrous? thanks for the help...
Last edited by TWINK; 06-14-2004 at 12:09 AM. Reason: i put some wrong info down on the post
#2
Originally Posted by TWINK
what would a 98 t/a auto with a trex cam, 4400 stall, 323 gear, ls6 intake with drags cutting a 1.6 60' run in the eighth and quarter? Would a 7.032@93 be reasonable? or would that have to be with nitrous? thanks for the help... he has nitrous and were trying to figure out if he sprayed or not
#3
11 Second Club
iTrader: (20)
Join Date: Jul 2002
Location: Jonesboro, Ga
Posts: 1,988
Likes: 0
Received 0 Likes
on
0 Posts
7.0 sounds reasonable, IIRC thats approximately low low 11's or high 10's. That sounds like a max effort setup, but its doable. I hope to run similar numbers. I'm a little surprised that he ran that with a 1.6 60' tho.
Peace,
Josh
Peace,
Josh
Trending Topics
#10
"The Drag Racing Director"
iTrader: (10)
Originally Posted by TWINK
what would a N/A stock cubic inch LS1 auto with a trex cam, 4400 stall, 323 gear, ls6 intake with drags cutting a 1.6 60' run in the eighth and quarter? Would a 7.032@93 be reasonable? or would that have to be with nitrous? thanks for the help...
BUT, I have a N/A stock ls1 with ls6 intake. A3, T-Rex cam, 5.13 gears at 3200lbs. I cut high 1.4 60fts and run 6.9's to 7.0's @ 98 mph in the 1/8 mile and my car is a race car.
I sure would like to see the above car run those numbers.
Coach