Two wheel up pics
#7
Originally Posted by Fireball
yeah...the BMR XTREME DRAG
congrats on the wheelie, i feels good dont it. the pic in my sig was a 1.53 60' few weeks ago. i need a digital camcorder so i can capture its highest point.
Trending Topics
#11
Thread Starter
TECH Senior Member
iTrader: (21)
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Originally Posted by Phil99vette
That looks soo sick....Man, why won't my car pull the wheels off the ground! I can bust a 1.45 60' but the wheels are planted....What shocks are you running?
Phillip
Phillip
#13
Thread Starter
TECH Senior Member
iTrader: (21)
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Originally Posted by gator's 99TA
nice level launch. are you spinning at all?
#17
Whoa! The wheels up are impressive but what really stands out the most is how level the car is! Any ideas on why your car is launching so level up front, both tires seem to be the same height off the ground, no twist at all! Do you think the BMR sway bar gets the credit?
I have ALL the BMR suspension parts EXCEPT the extreme rear sway bar but my left front still lifts higher than my right front despite the fact that I also have a hawker battery and no A/C. So it’s not like I’m too heavy in the right front of the engine bay. Plus I have an airbag in the rear right and I'm pretty sure the rear squats evenly so the flex must be in the middle or the front of the car.
Here’s a couple of my launches (you can clearly see the left side is higher):
http://www.racingperspectives.com/cg...-02-04_068.jpg
http://www.racingperspectives.com/cg...-02-04_093.jpg
I have ALL the BMR suspension parts EXCEPT the extreme rear sway bar but my left front still lifts higher than my right front despite the fact that I also have a hawker battery and no A/C. So it’s not like I’m too heavy in the right front of the engine bay. Plus I have an airbag in the rear right and I'm pretty sure the rear squats evenly so the flex must be in the middle or the front of the car.
Here’s a couple of my launches (you can clearly see the left side is higher):
http://www.racingperspectives.com/cg...-02-04_068.jpg
http://www.racingperspectives.com/cg...-02-04_093.jpg
#18
Thread Starter
TECH Senior Member
iTrader: (21)
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
the solid swaybar was the definately the trick for an even launch
I've been preaching this locally for a year now
Before the swaybar, the car would launch hard toward the wall...since the swaybar, nice straight launches everytime
I've been preaching this locally for a year now
Before the swaybar, the car would launch hard toward the wall...since the swaybar, nice straight launches everytime
#19
Originally Posted by Fireball
the solid swaybar was the definately the trick for an even launch
I've been preaching this locally for a year now
Before the swaybar, the car would launch hard toward the wall...since the swaybar, nice straight launches everytime
I've been preaching this locally for a year now
Before the swaybar, the car would launch hard toward the wall...since the swaybar, nice straight launches everytime
Sounds like I need to complete my BMR suspension.