5.7stroker

iTrader: (36)

My next project is going to be a battery relocation/wiring upgrade with a master cutoff switch. Looks like this diagram is what I need to follow:



Shopping list:

895-48200 ALUM BATT BX OPTIMA NHRA - $81.17
Stinger 1 in (0 awg) 2 out (4 awg) distribution blocks x2, part number SSDB024 - $15.69*2
ANL 100 amp fuse holder and fuse 741725933821 - $8.95
Voodoo (20) 1/0 AWG Gold Wire Crimp Cable Ring Terminals -RT1/0-G-3/8 $13.95
stinger 2 pack GM side post battery terminals #GMBATT- $9.99
IMC AUDIO 0 awg 25' Ft red cable - $20.49
IMC AUDIO 2 awg 20' Ft red cable - $28.94
Uxcell 4.7"x4.7"x2.3 junction box - $10
MASTER DISCONNECT SWITCH 10305 $19.01
BILLET SWITCH HNDL BLACK 10341 $13.59
FACEPLATE BILLET BLACK 10346 $11.78
150AMP MNL CIRCUIT BREAKeR 10576 $22.66

Also looking to do a coil pack relocation, using some of the boots I already have on my current MSD wire set.

MSD STRIPPER-CRIMPER MINI 8.5 13503 - $8.69
MSD 8.5mm wire 25 ft -34019 - $52.17
BOOT/TERM 90D PLUG -8850 $21.33
New set of 10 MSD 34605 dual band spark plug terminals $14.95
Coil pack relocation kit michigan motorsports - $119

LeftySS has been helping me out: https://ls1tech.com/forums/generatio...tion-pics.html
Hopefully my setup looks 1/2 as nice as his: