10 sec guys/ what headers?
Thread Starter
TECH Fanatic
Joined: Jan 2002
Posts: 1,566
Likes: 0
From: pa
Re: 10 sec guys/ what headers? Dynatech does sell some weld-on collectors, which I have, but they are not coated and you will have to sacrifice the coating on your headers where they are welded on.
where can I get these weld on collectors nine ball?
you can weld all around the 4 header tubes? even on the inside where they all meet?
I just ordered dynatech 17/8 stepped! I hope it's a good choice for the mti stage 2heads/c2 cam and are 360 short block...
so is the mrege collector worth getting?
should I do 3" or 3 1/2" collectors?
I am doing the same set up as george with the 2 6" flowmasters and turn downs.
where can I get these weld on collectors nine ball?
you can weld all around the 4 header tubes? even on the inside where they all meet?
I just ordered dynatech 17/8 stepped! I hope it's a good choice for the mti stage 2heads/c2 cam and are 360 short block...
so is the mrege collector worth getting?
should I do 3" or 3 1/2" collectors?
I am doing the same set up as george with the 2 6" flowmasters and turn downs.
Re: 10 sec guys/ what headers? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Damian:
<strong> You don't need all these fancy smancy longtubes to be fast. Plenty of 10-11 second LS1's running Macs around here <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Josh </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yep, and I have not convinced myself to change otherwise, at least yet. TIG welded the outside of the tubes to the flanges then ported them. Collectors are stock.
<strong> You don't need all these fancy smancy longtubes to be fast. Plenty of 10-11 second LS1's running Macs around here <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Josh </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yep, and I have not convinced myself to change otherwise, at least yet. TIG welded the outside of the tubes to the flanges then ported them. Collectors are stock.
