Heads & Cam Runs At 5000ft DA!!
Thread Starter
LS1Tech Premium Sponsor
iTrader: (4)
Joined: Nov 2001
Posts: 4,229
Likes: 4
From: Texas!
Heads & Cam Runs At 5000ft DA!! REMEMBER This is at 4930ft above Sea Level D.A.!!
Do to the number of people, and the wait to get through the gate we were only able to get 2 passes last night The only na pass we made was a 12.1@119.x The vette spun pretty hard, then passed the 60' it bogged, so I know 11.8s should have been no problem with more practice.
For pass #2 we decided to spray the TNT 100 shot with about 1000-1050 psi of bottle pressure. I set the window to not spray until 3800rpm so it would have somewhat of a rolling chance, for the most part that worked & the vette ripped a 1.6x short time!! The stock fuel pump was definately not liking the nitrous to much, as it was missing up top so I had to short shift every gear pretty bad The lady at the timeslip booth handed me the slip and I about crapped my pants right there! 10.80@130!! Nothing wrong with them apples!
Altitude corrected thats a easy 11.40 or so NA <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Thats a strong Heads & Cam Car <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Still haven't bought gears for it, and its still running a C5 tranny instead of the Z06 tranny <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Well now I know the car makes the power that I was hoping it would, so now back to the fuel drawing board. We will be installing a Racetronics/Walbro fuel pump this week & dynoing the setup next weekend in Dallas @ LG. Here is a rundown of the specs from the car.
99 Hard Top Corvette
www.jperacing.com
Speedaholics Stage 2 Heads
2.055 1.57 Valves 918 Springs
JPE Racing FU-2 228 Cam
TPIS Headers
MTI X Pipe
Borla STREET Exhaust
LS6 intake
ASP Pulley
1/2 MSD Wires 1/2 Taylor Wires
Tuning will be done next weekend
Things we still have to do:
JpeRacing Ported Throttle Body
Work on MAF a little
Fuel Pump
Line Lock
Jet Up to 150
Do to the number of people, and the wait to get through the gate we were only able to get 2 passes last night The only na pass we made was a 12.1@119.x The vette spun pretty hard, then passed the 60' it bogged, so I know 11.8s should have been no problem with more practice.
For pass #2 we decided to spray the TNT 100 shot with about 1000-1050 psi of bottle pressure. I set the window to not spray until 3800rpm so it would have somewhat of a rolling chance, for the most part that worked & the vette ripped a 1.6x short time!! The stock fuel pump was definately not liking the nitrous to much, as it was missing up top so I had to short shift every gear pretty bad The lady at the timeslip booth handed me the slip and I about crapped my pants right there! 10.80@130!! Nothing wrong with them apples!
Altitude corrected thats a easy 11.40 or so NA <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Thats a strong Heads & Cam Car <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Still haven't bought gears for it, and its still running a C5 tranny instead of the Z06 tranny <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Well now I know the car makes the power that I was hoping it would, so now back to the fuel drawing board. We will be installing a Racetronics/Walbro fuel pump this week & dynoing the setup next weekend in Dallas @ LG. Here is a rundown of the specs from the car.
99 Hard Top Corvette
www.jperacing.com
Speedaholics Stage 2 Heads
2.055 1.57 Valves 918 Springs
JPE Racing FU-2 228 Cam
TPIS Headers
MTI X Pipe
Borla STREET Exhaust
LS6 intake
ASP Pulley
1/2 MSD Wires 1/2 Taylor Wires
Tuning will be done next weekend
Things we still have to do:
JpeRacing Ported Throttle Body
Work on MAF a little
Fuel Pump
Line Lock
Jet Up to 150
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Re: Heads & Cam Runs At 5000ft DA!! Congrats, Jason. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
I was racing so I missed your runs <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> , but my friends said you were hauling ***!!
Let me know when you are going to LG, I'd like to get my car dynoed and do a little tuning too.
I forsee low 10's when you get everything lined out.
I was racing so I missed your runs <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> , but my friends said you were hauling ***!!
Let me know when you are going to LG, I'd like to get my car dynoed and do a little tuning too.
I forsee low 10's when you get everything lined out.
Re: Heads & Cam Runs At 5000ft DA!! I knew that car was easily pulling as hard as your T/A did w/ the 422 when I rode in it last week w/ the 100 shot! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> To hit 10's on your first bottle pass in the car is friggin' awesome! People don't understand that trapping over 119 MPH at Idalou Raceway is a HUGE feat! I can't wait to get it to the Motorplex next weekend, especially with at least a 150 shot. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
__________________
Re: Heads & Cam Runs At 5000ft DA!! </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by GeorgeC:
<strong>What the heck were the weather conditions to come up with a DA of 5000ft?
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Actual altitude of Lubbock is 3,200'.
<strong>What the heck were the weather conditions to come up with a DA of 5000ft?
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Actual altitude of Lubbock is 3,200'.
__________________
On The Tree
Joined: Nov 2001
Posts: 157
Likes: 0
From: Katy Tx
Re: Heads & Cam Runs At 5000ft DA!! Congrats..Seems like Brent ported a damn good set of heads for u. I was convinced he was a true head porter when i saw the flow numbers off of Ethans heads <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Philip
Speedaholics
Philip
Speedaholics
TECH Enthusiast
Joined: Nov 2001
Posts: 666
Likes: 0
From: Richardson, TX, USA
Re: Heads & Cam Runs At 5000ft DA!! </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Jason 98 TA:
<strong>JPE Racing FU-2 228 Cam, 1/2 MSD Wires 1/2 Taylor Wires</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Congrats Jason, that's hauling ***..... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I think it all had to do with the Spark Plug Wire Combo!!! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
What are the specs on the JPE Racing FU-2 228 cam?
Mir Naziruddin
<strong>JPE Racing FU-2 228 Cam, 1/2 MSD Wires 1/2 Taylor Wires</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Congrats Jason, that's hauling ***..... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I think it all had to do with the Spark Plug Wire Combo!!! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
What are the specs on the JPE Racing FU-2 228 cam?
Mir Naziruddin
Trending Topics
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Re: Heads & Cam Runs At 5000ft DA!! I always seem to miss the good Lubbock racing action! Yea the air here isn't great at all and 5000 DA is about the lowest I've seen, lol... Very good results for the first time out. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
The FU-2 camshaft is a 228/228 .588"/.588" 111.5 lsa, Jason came up with the specs. and it does real well. I've got another project that this cam may be going in also, but it will have valve-reliefed pistons also.
The FU-2 camshaft is a 228/228 .588"/.588" 111.5 lsa, Jason came up with the specs. and it does real well. I've got another project that this cam may be going in also, but it will have valve-reliefed pistons also.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Launching!
Joined: Dec 2001
Posts: 291
Likes: 0
From: Houston
Re: Heads & Cam Runs At 5000ft DA!! For the first time too the track with the car...
Not bad at all dude. It's cool too see it give the 422 a run for the money the first time out!!! Nice too see things are coming along like there should.
see ya in Dallas.
Brent
Speedaholic
Engines & Cylinder heads
Not bad at all dude. It's cool too see it give the 422 a run for the money the first time out!!! Nice too see things are coming along like there should.
see ya in Dallas.
Brent
Speedaholic
Engines & Cylinder heads
Thread Starter
LS1Tech Premium Sponsor
iTrader: (4)
Joined: Nov 2001
Posts: 4,229
Likes: 4
From: Texas!
Re: Heads & Cam Runs At 5000ft DA!! Thank you Mr. Monkey <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
The FU-2 does have 584 lift, but there is also a FU-1 with XE lobes on the exhaust side for stock piston cars <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Look for dyno numbers next week <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
The FU-2 does have 584 lift, but there is also a FU-1 with XE lobes on the exhaust side for stock piston cars <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Look for dyno numbers next week <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
On The Tree
Joined: Feb 2002
Posts: 148
Likes: 0
From: San Antonio TX
Re: Heads & Cam Runs At 5000ft DA!! Sweet times... Maybe we need to run when you come out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I get mine tuned on friday also <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Another happy
Speedaholic
Customer <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Another happy
Speedaholic
Customer <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />