Roll Cage
Roll Cage Just to let everyone know that we are now making Roll Cages for the 4th Gen F-Body. They are legal to run under 9.99 in the 1/4.
WE have many photo's in our Install/Tech page.
Check with your favorite advertiser on here for availability.
http://www.wolferacecraft.com/images.../fbcage-02.JPG
WE have many photo's in our Install/Tech page.
Check with your favorite advertiser on here for availability.
http://www.wolferacecraft.com/images.../fbcage-02.JPG
TECH Senior Member
Joined: Nov 2001
Posts: 10,341
Likes: 1
Re: Roll Cage LOL <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Sponsors have been carrying and sellingyour cages since this sites inception <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Welcome to the board, you will find a lot of fans of your product here <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Chris
ps- What is the turnaround on a 5 point weld in cage with drivers side swingout?
<small>[ September 10, 2002, 04:52 PM: Message edited by: Chris ARE 360 ]</small>
Sponsors have been carrying and sellingyour cages since this sites inception <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Welcome to the board, you will find a lot of fans of your product here <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Chris
ps- What is the turnaround on a 5 point weld in cage with drivers side swingout?
<small>[ September 10, 2002, 04:52 PM: Message edited by: Chris ARE 360 ]</small>
Re: Roll Cage Thanks Chris
Everyone knows about our Roll Bars. But this is our full Roll Cage. Legal under 9.99.
Time right now for weld-in roll bar will be about 1 to 1 1/2 weeks
Dan
www.wolferacecraft.com
Everyone knows about our Roll Bars. But this is our full Roll Cage. Legal under 9.99.
Time right now for weld-in roll bar will be about 1 to 1 1/2 weeks
Dan
www.wolferacecraft.com
TECH Senior Member
Joined: Nov 2001
Posts: 10,341
Likes: 1
Re: Roll Cage DOH I should read the whole message I guess <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" />
Sounds great on the new cage!!
Cheers,
Chris
I will get in contact with you soon on the 5 point.
Sounds great on the new cage!!
Cheers,
Chris
I will get in contact with you soon on the 5 point.
Re: Roll Cage welcome aboard Dan! You added the 5th point to my 4-pt. bar in my sunset orange SS last May, just before Super Chevy. A removable swingout is WELL worth the money! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Trevor
Trevor
__________________
Trending Topics
Re: Roll Cage I have the Wolfe 5 point Chromoly with swing out bar. I find myself just getting in with the bar in place. It takes more time to pull the pin, swing the bar and then close and re-pin than just to go over the bar. That's my two cents.
Dan, are you sure 1 to 1 1/2 weeks. Mine took 8 weeks and was told 2 weeks. I am very happy with it but sure would have been nice to have instructions.
Dan, are you sure 1 to 1 1/2 weeks. Mine took 8 weeks and was told 2 weeks. I am very happy with it but sure would have been nice to have instructions.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Launching!
Joined: Nov 2001
Posts: 289
Likes: 0
From: Dallas, Tx
Re: Roll Cage Dan,
I have a Wolfe 5 point cage in my '01 Z28. I heard a rumor the other day that NHRA was going to make it mandatory in 2003 that all cars running between 11.99 and 10.00 to have a six point cage. Any truth to this rumor?
I have a Wolfe 5 point cage in my '01 Z28. I heard a rumor the other day that NHRA was going to make it mandatory in 2003 that all cars running between 11.99 and 10.00 to have a six point cage. Any truth to this rumor?
Teching In
Joined: Feb 2002
Posts: 47
Likes: 0
From: Duncanville
Re: Roll Cage Joel's car was built as an AMS project, so when it came up for sale we decided to keep it in the family.
The car is an R&D test bed for all of the new Wolfe Racecraft F-body suspension components. AMS has a new 355 cubic inch LT1 motor and a Procharger set up with an F1R system. The car should be completed soon and you can count on us being at the Thunder Shootout. Looking to go 8s with the new setup....
Keith
http://www.arlingtonmotorsports.com
The car is an R&D test bed for all of the new Wolfe Racecraft F-body suspension components. AMS has a new 355 cubic inch LT1 motor and a Procharger set up with an F1R system. The car should be completed soon and you can count on us being at the Thunder Shootout. Looking to go 8s with the new setup....
Keith
http://www.arlingtonmotorsports.com
