Going to the track tomorrow :)
Also going to run the 28x10 inch Hoosier slicks.
ET isnt going to be stellar (on stock clutch) but I am hoping to get traction through all gears and a decent mph out of the car (~123mph)
Macleod rev lok 2 and Macleod adj master along with HD Driveshaft and DS loop are going to be in the car within the next two weeks <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Then I can launch this pig at 6000rpm <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
Cheers,
Chris
<small>[ September 13, 2002, 11:43 AM: Message edited by: Chris ARE 360 ]</small>
I bet u cant wait to lay the hammer down Frosty...
Good luck...
JS
<small>[ September 13, 2002, 11:56 AM: Message edited by: JS ]</small>
How's the weather up there? Is it starting to cool off and get "fall-like" yet? Still hot & muggy down here, and it won't stop raining every weekend I want to race!
Cheers,
Chris
Now that I have decided to keep the car I am going to set it up right drivetrain wise...
After clutch, DS mods etc if I can hook to a 1.5 sixty sub 11.3@~123mph should be no problem in good air. That will be perfect for me and remain streetable.
That is the final goal when all is said and done <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Chris
Trending Topics
The Best V8 Stories One Small Block at Time
thanks,
Chris
ps- If you can help me out with my problem too that would be wonderful heheh
Cheers
https://ls1tech.com/ubb/ultimatebb.p...c;f=5;t=002444





