Anyone having good luck with a 408 on spray?
#1
TECH Addict
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Michigan
Posts: 2,161
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm thinking of putting one together, but dont see much talk about anyone running a 408 with times in the low 9 sec range.
Anyone?
Anyone?
#2
TECH Fanatic
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Black Sunshine/ 00SS
I'm thinking of putting one together, but dont see much talk about anyone running a 408 with times in the low 9 sec range.
Anyone?
Anyone?
I'd like to know as well.
I was talking with Allan Futral about this. I am thinking about having him build me a 408 nitrous short block for next year. I as talking with him about building the short block with head studs etc and all I would have to do is move my S3 heads, 90mm intake, water pump and headers over. I would put my 346 SR motor on the shelf while I played with some nitrous.
I'd like to be able to hit a 150 off the line then an additional 300 direct port in 2nd and 3rd gear for a total of 450 shot. Thinks it possible with a 408 iron block? I know my heads and valve train could take, they are badass.
Lee
#4
TECH Fanatic
iTrader: (10)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by FEAR THE LS1
ttt
I'd like to know as well.
I was talking with Allan Futral about this. I am thinking about having him build me a 408 nitrous short block for next year. I as talking with him about building the short block with head studs etc and all I would have to do is move my S3 heads, 90mm intake, water pump and headers over. I would put my 346 SR motor on the shelf while I played with some nitrous.
I'd like to be able to hit a 150 off the line then an additional 300 direct port in 2nd and 3rd gear for a total of 450 shot. Thinks it possible with a 408 iron block? I know my heads and valve train could take, they are badass.
Lee
I'd like to know as well.
I was talking with Allan Futral about this. I am thinking about having him build me a 408 nitrous short block for next year. I as talking with him about building the short block with head studs etc and all I would have to do is move my S3 heads, 90mm intake, water pump and headers over. I would put my 346 SR motor on the shelf while I played with some nitrous.
I'd like to be able to hit a 150 off the line then an additional 300 direct port in 2nd and 3rd gear for a total of 450 shot. Thinks it possible with a 408 iron block? I know my heads and valve train could take, they are badass.
Lee
If you wanna sell that shortblock in the winter hook a brother up lol
#5
TECH Veteran
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Cartek's blue camaro runs a 408 Iron block. Here is a video 0f it going 9.0x's at 149 mph with the nitrous coming in well past the 60' (with only a small shot of nitrous
). They are making some minor changes to the setup and expect 8.50's out of it when it's done.
http://www.cartek.net/videos/cartek9.wmv
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
http://www.cartek.net/videos/cartek9.wmv