My new LS6 427 solid roller is done
TECH Fanatic
Joined: Nov 2001
Posts: 1,308
Likes: 0
From: Indianapolis, IN
Re: My new LS6 427 solid roller is done Niiiiiiiiiiice!! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Thread Starter
Launching!
Joined: Nov 2001
Posts: 210
Likes: 0
From: Brick , NJ
Re: My new LS6 427 solid roller is done I do not know the current cam specs as a lot of things were changed while dealing with an oiling issue with the C5R block. I imagine a similar problem that they ran into with the Colonel's motor as I know that the two shops confered with each other over this and it took special custom made parts to cure it on this end also.
The car is still registered here in NJ, but I don't think it's going to see too much street time.
Mickey
The car is still registered here in NJ, but I don't think it's going to see too much street time.
Mickey
Re: My new LS6 427 solid roller is done Ahhhh, now I know why you've been so quiet lately Mickey. Glad to see you are still around and getting faster!
Jericho..... drool! Mind if I ask what that setup cost complete? Is it the same road race 4-speed that Judson uses?
-Tony
Jericho..... drool! Mind if I ask what that setup cost complete? Is it the same road race 4-speed that Judson uses?
-Tony
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Launching!
Joined: Nov 2001
Posts: 210
Likes: 0
From: Brick , NJ
Re: My new LS6 427 solid roller is done Tony, here is the pricing page at Jerico's site for the DR4 drag race 4speed. Clutch or clutchless. I got the verticle gate shifter also.My trans is the clutch type. I think, that the only difference in this trans and Judsons is the road race sliders, making it possible to downshift. If I remember correctly, the scattershield, custom clutch, DR4 4 speed with V gate shifter came to something like $4500. http://www.jericoperformance.com/pri...ch&clutchless4
Mickey
Mickey
Re: My new LS6 427 solid roller is done Hi Mickey, sounds like you win the award 2003's stealthiest build. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Hope you bring it to BG in May!!!!
PSJ
Hope you bring it to BG in May!!!!
PSJ
TECH Fanatic
Joined: Nov 2001
Posts: 1,347
Likes: 1
From: Freeland, MD
Re: My new LS6 427 solid roller is done Very, very good numbers. That thing should haul it. Could be great track numbers also - I wonder how far you are going to go into the 9s with that.
This also makes me very curious to see Colonel's motor results. You guys are making some monsters.
Solid roller on the way here too, though no sexy sheet metal intake <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> or Jerico tranny.
This also makes me very curious to see Colonel's motor results. You guys are making some monsters.
Solid roller on the way here too, though no sexy sheet metal intake <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> or Jerico tranny.
Re: My new LS6 427 solid roller is done Gotcha buddy,I though u were doing the trans install youself----------->G/Force is in PA.
The Jerico will handle anything u can throw at it too,Mick.
Good luck w/the setup...
JS
The Jerico will handle anything u can throw at it too,Mick.
Good luck w/the setup...
JS
Re: My new LS6 427 solid roller is done WOW!!!! awesome car!! good luck getting it to hook up <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Re: My new LS6 427 solid roller is done very nice!!!!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Thread Starter
Launching!
Joined: Nov 2001
Posts: 210
Likes: 0
From: Brick , NJ
Re: My new LS6 427 solid roller is done Well Joel, I was thinking Jerico right from the start because it's already a proven combo in a similar set up, the SAM car. John at More Performance was an instructor at SAM and worked for Judson for 10 years. He's already had experience with the LS1 and Jerico combo. Jerico is also in Charlotte, like More, so all parts are close and just a short drive away.
Mickey
Mickey
11 Second Club
Joined: Nov 2001
Posts: 394
Likes: 0
From: gilbertsville, PA
Re: My new LS6 427 solid roller is done HOLY HORSEPOWER WARS, BATMAN!
What is the redline on that beast?
Hope to see some shakedown runs this spring! <img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />
What is the redline on that beast?
Hope to see some shakedown runs this spring! <img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />
Re: My new LS6 427 solid roller is done Holy shyte!!
Can't wait to see it run..
damn there will be some fast cars form the east coast this year! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Can't wait to see it run..
damn there will be some fast cars form the east coast this year! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Re: My new LS6 427 solid roller is done Awesome Mickey, dont seem too long ago I remember meeting you and Tom up at Cecil one November, beleive she was a 370 ci motor then, 10.70s thru a 6 speed right? <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> i stil ahve them videos, Ill have to put them up here sometime.
When we gonna see you there again?
When we gonna see you there again?
