The Hot Rod is back!
#21
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Coach 02 M6 Z/28:
<strong> The Hot Rod came in at 2900 lbs. This without me in her. My weight is 250. So a grand total of 3,150. <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> , Put my 160lb *** in there and you are down to 3060. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Coach's motor is the same as last year. We just freshened it up with new rings, bearings, TR race headers (vs. his old Hookers) and updated cylinder heads. The tranny was also rebuilt and a new REV-lok II clutch installed. His old clutch looked like it could go another 200+ passes, but we thought it would be a good idea to change it while the motor was out.
<small>[ March 17, 2003, 11:40 AM: Message edited by: Jason99T/A ]</small>
<strong> The Hot Rod came in at 2900 lbs. This without me in her. My weight is 250. So a grand total of 3,150. <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> , Put my 160lb *** in there and you are down to 3060. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Coach's motor is the same as last year. We just freshened it up with new rings, bearings, TR race headers (vs. his old Hookers) and updated cylinder heads. The tranny was also rebuilt and a new REV-lok II clutch installed. His old clutch looked like it could go another 200+ passes, but we thought it would be a good idea to change it while the motor was out.
<small>[ March 17, 2003, 11:40 AM: Message edited by: Jason99T/A ]</small>
#24
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
good luck on a new best et and your bracket season coach! <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />
Derek
Derek
#25
"All Motor 9 Second club member"
iTrader: (60)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats on getting the Hotrod back on the road Coach. I'll be there with you Wednesday to witness the event. I'll also be there to compete with ya in the brackets <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> . That thing ought to fly! Good luck to ya and I'll see you out there!
James
James
#26
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have got a few emails on Coach's car, wondering what exactly was done to the motor. Here is the complete list (as much as I can remember):
- JE forged pistons
- Oliver 6.125" connecting rods
- stock crank
- JE rings
- Federal Mogul rod and main bearings
- GTP stage 2 truck heads, milled .050" (2.02/1.57)
- TR230/224 .575/.563 111lsa/111ICL
- Katech oil pump
- Crane lifters
- Comp adjustable timing set w/ JWIS chain
- GM '02 MLS head gasket
- ARP headstuds
- ATI superdamper
All we did this time around was install new rings, bearings, lifters, rod bolts, and refresh the heads with updated porting and 987 valvepsprings/GM locks. The motor made over 300 passes last year and held together fine, so we didn't want to change too much. lol
Jason
<small>[ March 17, 2003, 10:55 PM: Message edited by: Jason99T/A ]</small>
- JE forged pistons
- Oliver 6.125" connecting rods
- stock crank
- JE rings
- Federal Mogul rod and main bearings
- GTP stage 2 truck heads, milled .050" (2.02/1.57)
- TR230/224 .575/.563 111lsa/111ICL
- Katech oil pump
- Crane lifters
- Comp adjustable timing set w/ JWIS chain
- GM '02 MLS head gasket
- ARP headstuds
- ATI superdamper
All we did this time around was install new rings, bearings, lifters, rod bolts, and refresh the heads with updated porting and 987 valvepsprings/GM locks. The motor made over 300 passes last year and held together fine, so we didn't want to change too much. lol
Jason
<small>[ March 17, 2003, 10:55 PM: Message edited by: Jason99T/A ]</small>
#28
Moderator
iTrader: (5)
Join Date: Nov 2001
Location: Montgomery Texas
Posts: 5,585
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Coach, I will be right with ya!!!! <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
But I believe your a bit lighter...
Coach, I will be right with ya!!!! <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
But I believe your a bit lighter...
#30
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Villain281H,
Thanks, I can't wait untill this weekend. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
James,
We will see ya out there. I will bring your wheels and tires. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Jason,
Thanks for the exact info on the motor. <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
Jeff,
I hope so. We might even be ligter by Wednesday. <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
Coach
Thanks, I can't wait untill this weekend. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
James,
We will see ya out there. I will bring your wheels and tires. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Jason,
Thanks for the exact info on the motor. <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
Jeff,
I hope so. We might even be ligter by Wednesday. <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
Coach
#31
TECH Enthusiast
Join Date: Jan 2002
Location: West Monore
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Coach, good luck with your race car/hot rod this season. Seems you have got it ready. Cheers. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#32
TECH Fanatic
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good luck with you re-freshed hot rod coach. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> I'm sure the local points racers hate to see you get that thing back. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> Sounds like your ready to take the fastest hydraulic cammed M6 title. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Bruce
Bruce