Anyone else have trouble balancing thier welds?
04-26-2005, 12:15 PM
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Jan 2005
Location: Rowletts,KY
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
Anyone else have trouble balancing thier welds? Got my 275/60/15 ET DRs mounted on my 15X10 prostars ysterday. The guy couldnt get them to balance right and said one of them looked bent. I took it to another place and they got them to balance with 5oz on one and .5 on the other. the one with .5oz looked to wobble on thebalancing machine. Anyone else have problems like this with New weld wheels?
04-26-2005, 02:45 PM
#4
On The Tree
Join Date: Mar 2005
Location: Ewing, NJ
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I would just throw them on and take them for a spin and see if you feel anything. If they feel okay on the street, I wouldn't have any problem taking them to the strip.
04-26-2005, 06:39 PM
#5
TECH Addict
5 ounces is a hell of a lot for that small of a tire. Usually at work we use that much for RV tires ad mudders.
See if you can get the tires match mount balanced. I'm pretty sure most Coates balancers have it. The techs should know what to do..
See if you can get the tires match mount balanced. I'm pretty sure most Coates balancers have it. The techs should know what to do..
04-26-2005, 08:53 PM
#6
TECH Addict
iTrader: (22)
Join Date: Sep 2004
Location: tennessee
Posts: 2,639
Likes: 0
Received 0 Likes
on
0 Posts
one of my welds is slightly warped but still balanced without too much trouble.sometimes the piece in the center clunks around and sometimes it don't when balancing.