TH350/TH400 Guys.. What gears are you running?

Reply Subscribe

Thread Tools

Search this Thread

03-15-2006 | 04:06 PM

#21

Charles Cyrus

9 Second Club

Joined: Aug 2003

Posts: 604

Likes: 0

From: Raleigh NC

I've got a 4.10 gear with a 275/60/15 M/T DRs, TH-350 with an Art Carr 3800 stall, I think it was trapping bout 6300-6450, not sure.

Reply Like

03-15-2006 | 11:28 PM

#22

gator's 99TA

TECH Senior Member

iTrader: (2)

Joined: Nov 2001

Posts: 9,971

Likes: 2

From: Tampa Bay

Quote:

Originally Posted by kp

Just take a gear calculator and add 500rpm for a typical 8-9" converter with your target mph/tire size and you will be close. Better off being a little conservative then running out on the big end..

yea nothing like being on the rev limitor as you get to the 1000' mark!

Reply Like

03-15-2006 | 11:30 PM

#23

1QuickT-A

Thread Starter

10 Second Club

iTrader: (12)

Joined: Dec 2004

Posts: 2,034

Likes: 0

From: Birmingham, Alabama

Quote:

Originally Posted by Silvr98z28

Coan 350 with a 500 Stall
28" Tall Slicks with 4:88 gear

I dont see how in the hell that is working.. unless you are spinning your motor WAY up in the rpms.. A friend of mine is running 4.88s with a Th350 and a 3000 stall and he can barely run the 1/8th mile with the limiter at 6400..

Reply Like

03-15-2006 | 11:38 PM

#24

gator's 99TA

TECH Senior Member

iTrader: (2)

Joined: Nov 2001

Posts: 9,971

Likes: 2

From: Tampa Bay

its the ultra efficient 500rpm stall converter.

Reply Like

03-16-2006 | 09:01 AM

#25

Silvr98z28

TECH Enthusiast

Joined: Oct 2002

Posts: 593

Likes: 0

From: Chicago

I didn't say I wasn't spinning it high.
Actually haven't made a pass with this converter/ Trans but with my 4L60 and a YTP 4400 I was crossing at 7200.

Reply Like

Reply Subscribe