Stenod Performance weld-in 6 and 8 point roll bar kits!!
06-28-2006, 09:22 PM
#22
When the 10 pt chromoly version is ready, I'd be intrested in that. When you get it done, post up some pics of one installed.
Also, how are these gonna be for a bigger guy to get in and out, and with the seat clearance? I'm 6'3 and about 275, and plan to go with kirkey seats at the same time.. would something like this work, or would I be beter off with a full custom so it can be built to fit around me better ( better clearance for head, that sort of stuff ).
Also, how are these gonna be for a bigger guy to get in and out, and with the seat clearance? I'm 6'3 and about 275, and plan to go with kirkey seats at the same time.. would something like this work, or would I be beter off with a full custom so it can be built to fit around me better ( better clearance for head, that sort of stuff ).
06-28-2006, 10:46 PM
#24
The Bull
Originally Posted by JL ws-6
When the 10 pt chromoly version is ready, I'd be intrested in that. When you get it done, post up some pics of one installed.
Also, how are these gonna be for a bigger guy to get in and out, and with the seat clearance? I'm 6'3 and about 275, and plan to go with kirkey seats at the same time.. would something like this work, or would I be beter off with a full custom so it can be built to fit around me better ( better clearance for head, that sort of stuff ).
Also, how are these gonna be for a bigger guy to get in and out, and with the seat clearance? I'm 6'3 and about 275, and plan to go with kirkey seats at the same time.. would something like this work, or would I be beter off with a full custom so it can be built to fit around me better ( better clearance for head, that sort of stuff ).
06-29-2006, 04:33 AM
#25
Someone larger then me saying it's o.k., that's good news. I'm also looking at a removable steering wheel, for security and for added ease of getting out, I'm sure with that it will be prety easy. The guy that I'd have install it is pretty good, looka t the pic's in the thread about eastside's 25.2 outlaw car they are having built, guy that's doing that is who would most likly do the install... I think he's capable.
Post up soem pic's of the setup when it's all done, definately intrested.
Post up soem pic's of the setup when it's all done, definately intrested.
06-29-2006, 05:36 AM
#26
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
I sent you a PM. Please put me on the list for a 6 point. I will take one ASAP! I gave you all the info you need. WOW And to think I was going to wait for wolfe 
06-29-2006, 09:16 AM
#29
The Bull
Originally Posted by JL ws-6
Someone larger then me saying it's o.k., that's good news. I'm also looking at a removable steering wheel, for security and for added ease of getting out, I'm sure with that it will be prety easy. The guy that I'd have install it is pretty good, looka t the pic's in the thread about eastside's 25.2 outlaw car they are having built, guy that's doing that is who would most likly do the install... I think he's capable.
Post up soem pic's of the setup when it's all done, definately intrested.
Post up soem pic's of the setup when it's all done, definately intrested.
06-29-2006, 11:43 AM
#32
LS1TECH Sponsor
Thread Starter
iTrader: (1)
Join Date: Jan 2002
Location: Troy, MI
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Guys, we havn't forgot about you, just getting some work done in the shop right now, i'll be responding to everyones PM and responses by the end of today.
Thanks
Stenod
Thanks
Stenod
06-29-2006, 02:54 PM
#33
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stenod@StenodPerformance
Guys, we havn't forgot about you, just getting some work done in the shop right now, i'll be responding to everyones PM and responses by the end of today.
Thanks
Stenod
Thanks
Stenod
LMK ASAP 
06-29-2006, 07:43 PM
#36
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I will be ordering two of them. One for me and a buddie. We would really like the low slung like 1BADAIR 's car. We are not small at all 
Look forward to getting them Stenod
Look forward to getting them Stenod
06-29-2006, 08:42 PM
#37
LS1TECH Sponsor
Thread Starter
iTrader: (1)
Join Date: Jan 2002
Location: Troy, MI
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a plan.
Guys, Please PM me any questions you have, Were getting near that 10 mark for the first initial orders, so If you want the discounted rate better get it while it lasts.
And for those that want the roll bars Pre-notched, I'll offer that too. $450 is what i'll sell them for already Notched and ready to weld in for the 1st ten kits we sell. But... Like I said, that number is fastly approaching and that price won't last long.
Thanks guys
Stenod
Guys, Please PM me any questions you have, Were getting near that 10 mark for the first initial orders, so If you want the discounted rate better get it while it lasts.
And for those that want the roll bars Pre-notched, I'll offer that too. $450 is what i'll sell them for already Notched and ready to weld in for the 1st ten kits we sell. But... Like I said, that number is fastly approaching and that price won't last long.
Thanks guys
Stenod
06-30-2006, 09:11 AM
#39
My doors bars are custom. I don't know if Stenod will sell them in the kit. They are not legal but I haven't had any problems yet.
The only isssue with the bars being that low is my seat is pretty much in that position and doesn't really move forward or back much.
The bars of the Camaro are still lower than most companies door bars.
The only isssue with the bars being that low is my seat is pretty much in that position and doesn't really move forward or back much.
The bars of the Camaro are still lower than most companies door bars.