DERTY

I'll try to get a hold of Joe Van O today and see what he has in the LT1 department.

DERTY

I'm pretty sure we can request a TA front clip with the fog light holes filled. Did you want anything else special with it or just the bolt on front bumper? We can get you a quote if you can at least answer that as well as the material you want.

I also talked to Joe Van O today regarding the LT1 style hood. Unfortunately he only makes a stock style LT1 ram air hood. He doesn't make the "bubble" hood or anything with the raised height for the 93 to 97 body style. He only has the "bubble" hood for a 3rd Gen and the 98 to 02 that I posted.

evojuiced

Any chance Joe has made any new lt1 molds?

T/A KID

iTrader: (12)

Lets see some dash pics????????????

Slow Z28

iTrader: (19)

and any close up pics on how the camaro wings are installed?

just remember a post saying you have to close up the area under the stock "wing" since it defeats the purpose

Beaflag VonRathburg

iTrader: (176)

Glad to see someone is carrying his products now. His website is arcaic.

promod1955

iTrader: (44)

derty, has joe started/ making plans to make a complete front end for the camaros? I dont realy care for vfn's.

DERTY

Not likely. I'll ask Stenod to ask him next time he calls him.

DERTY

We have not had a dash come through the shop yet to get a photo of. It looks very much like the VFN dash from what I know about it. Replacement dashes are not that galmorous. If you want to have a stock appearing dash, gut the stock one. It's fairly light in the grand scheme of things.

DERTY

We have some of Tom Kempf's car around somewhere. I don't know if we posted them yet, but I'll look around and see if we can get some posted. And yes, you do have to fill in under the stock Camaro wing so that all of the air goes over the top of the wing.

DERTY

I'm not sure if he does or not. We have a couple sources for the Firebird one piece front ends that are pretty good looking. Not sure about the Camaro one as much. I'd suggest calling the shop and ask Joe (Stenod) to call Joe Van O about it. He could get you a definitive answer. The shipping is going to be a bit rough because of it's size.

evojuiced

what front clips do you have for the firebirds?

DERTY

They're all stock replacement clips. With or without fenders and hood, etc. It's more of what combination you want and what material.

evojuiced

can you pm me the price for the ls1 pieces.

thanks!

DERTY

You'll have to call the shop and ask Joe what you want quoted. I don't actually work for Stenod. Removing me as the middle man is going to make it easier for you because I travel too much to respond to PM's and posts every day. If they don't pick up the phone, leave a message because they are usually working in the back and often times return calls several times a day.

BigBronco

iTrader: (2)

Awesome. Will you guys also be carrying Joe's Mustang hoods? I will send all of the people who ask us about our Overbeek hoods your way.


Good products and look Great! We have been pleased with our Carbon Fiber Cowl hood (Pin on)

Pic of it...

DERTY

Anything Joe Van O produces, Stenod can get. He has a lot of other stuff beyond just the Camaro/Firebird/Mustang stuff as well.

I'll provide this general warning for everyone though, no one stocks any of Joe Van O's parts. They are all built to order and his back log at times can be MONTHS! Don't order anything and expect to get it by next week with his stuff or put it off as the last minute purchase before finishing your project car. It will take quite a bit of time on average to get a part built and the cost of shipping is going to be a fairly pricey chunk of the purchase unless you are able to pick it up to avoid the freight charges.

As long as you have those two expectations set, you will not be disappointed by the end product.

Slow Z28

iTrader: (19)

Derty,

thanks for the post. i tried searching and didn't see anything on what was done, and tried the site in tom's signature and didn't see anything.

if anything pop's up, would be greatly appreciated

thanks,

chris

DERTY

They're putting Tom's car back together right now. I'll snap a photo of it when I'm back over there.

a98ws6

iTrader: (48)

Derty, that ws6 style cowl hood is only a pin on hood due to the fact that it goes up to the windshield correct? Are the prices still the same as the ones posted up top?
Thanks.