anti-rollbar??
I was in the same delima and didn't want to have to disconnect for street driving. Also the Wolfe would not clear my over the axle duals. I went with the Spohn. Hope to have it on with some results soon.
For you guys already using one any tips on adjustment and setup?
For you guys already using one any tips on adjustment and setup?
just go by the instructions for adjusting it, for the set up grease the bushings well, when putting it on getting the over axle clamps is a bitch with only one person so get a buddy to help you, get those snug upped pretty well to the point where it requires a little effort to slide it around and get it completely centered, after that get the body mounts taken care of (can do this first or second this is just the order i did it in) after that take then end links at equal length and put those on snug them up but dont completely torque em down, make sure the bar is still centered left to right (easiest way is to use something to shim it so it cant really move) and torque down the clamps after that just go back and retighten the end links after that you can either leave it or adjust the endlink length
I put mine on yesterday (by myself....what a pain in the *** get a freind to help)
I got rained out at the track last night but managed one pass. It was tied with my previous best 60ft @1.61 so I think there will be improvement over time.
I got rained out at the track last night but managed one pass. It was tied with my previous best 60ft @1.61 so I think there will be improvement over time.
there will be, i came down from a 1.91 to a 1.73, last time i ran at the track and i got a run in before a rain out the humidity was a bitch and didnt make the track conditions any easier
i speak from experience on that one 
