25.2 on the ground
Thread Starter
Joined: Jan 2002
Posts: 5,295
Likes: 4
From: At the track
Originally Posted by 9sec93
where can i get me a set of those spindles? is it like the aje set-up that uses a different lower?
If you want the spindles then order some Santuffs. You will have to build upper and lower control arms.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
Joined: Jan 2002
Posts: 5,295
Likes: 4
From: At the track
We are trying to get some more pics posted.
David the car is on 29.5 X 10.5 S tires. The rear is a fabricated 9" we built in house. I will look on the length. The customer supplied the wheels and I stuck them under the car where I wanted them and built the housing from there.
David the car is on 29.5 X 10.5 S tires. The rear is a fabricated 9" we built in house. I will look on the length. The customer supplied the wheels and I stuck them under the car where I wanted them and built the housing from there.
Thread Starter
Joined: Jan 2002
Posts: 5,295
Likes: 4
From: At the track
Thread Starter
Joined: Jan 2002
Posts: 5,295
Likes: 4
From: At the track
Originally Posted by gator's 99TA
brian, what is the ballpark figure cost to reproduce a 25.2 chasis like you did here?
They start at $40 000.00. All you supply is wheels and tires.
