Loosen spindel nuts
Used to be somewhat common to loosen it and use 10w40 or something on the front wheel bearings on an all out drag car to get that last .0001. These cars have sealed front bearings so there is nothing to loosen 
6 & 8 Second Club
Joined: Aug 2006
Posts: 2,284
Likes: 0
From: Illinois, RT 66 dragway area
.
Yes we sure did, but don't forget our stuff was frigging old school and heavy back then. We would loosen up the entire front suspension and use a double nut. It was the second thing we did, after removing sway bar. The problem was the brakes still dragged, you had heavy *** drums, and most cars were very nose heavy.
.
Yes we sure did, but don't forget our stuff was frigging old school and heavy back then. We would loosen up the entire front suspension and use a double nut. It was the second thing we did, after removing sway bar. The problem was the brakes still dragged, you had heavy *** drums, and most cars were very nose heavy.
.
