T56?
Thread Starter
11 Second Club
iTrader: (3)
Joined: Apr 2007
Posts: 150
Likes: 0
From: Bloomington, IL.
T56? Just curious wondering how much power people are putting down with a stock T56. My new motor is going to be hopefully above 500hp and was just going to get the 1K upgrade performed from T56Rebuilds. Didn't know if people are recommending the Viper shaft or not.
I'm also upgrading from a Mcleod single disc to a twin.
I have been side stepping @ 5500 with 390 at the tires and haven't had any problems. I'm going to up the RPMs with the new setup though.
Thoughts? Ideas?
I'm also upgrading from a Mcleod single disc to a twin.
I have been side stepping @ 5500 with 390 at the tires and haven't had any problems. I'm going to up the RPMs with the new setup though.
Thoughts? Ideas?
Originally Posted by WFOWS6_IL
Just curious wondering how much power people are putting down with a stock T56. My new motor is going to be hopefully above 500hp and was just going to get the 1K upgrade performed from T56Rebuilds. Didn't know if people are recommending the Viper shaft or not.
I'm also upgrading from a Mcleod single disc to a twin.
I have been side stepping @ 5500 with 390 at the tires and haven't had any problems. I'm going to up the RPMs with the new setup though.
Thoughts? Ideas?
I'm also upgrading from a Mcleod single disc to a twin.
I have been side stepping @ 5500 with 390 at the tires and haven't had any problems. I'm going to up the RPMs with the new setup though.
Thoughts? Ideas?
I'm making 508 on motor and running it through a basically stock T56 with the exception of a steel 3-4 shift fork. Tranny has 65K+ miles on it too.
Launching as high as 7000rpm and shifting at 7000 as well.
T56 Rebuilds makes some awesome transmissions though!
Launching as high as 7000rpm and shifting at 7000 as well.
T56 Rebuilds makes some awesome transmissions though!
