need some frame/chassie guys please
need some frame/chassie guys please i just receltly trashed my car and i was rearended with no bumper support. Actually wasnt too much damage. Didnt even crack and panals! Just deformed them a little. BUT underneth the car is a little fucked up. My trunk hole was pushed up pretty far and i cant open my hatch from being pushed up so far. Again not that big of a deal, just pull it back out and get it realigned. My main question is my right frame rail is tweeked. Not bad but its bent inwards maby a 1/2. Left side is fine. It is after all the suspension mounts and everything. But could that effected the way my whole raerend is positioned at all? How hard is it actually tweek/twist the whole car over? Or am i freaking out too much. Im building this car to drag race and i want everything to be 100% straight on it.
You just need to take it to a body shop or someone with a frame rack. It could be pulled real easily. I am a 17 year body shop owner. I know these things.
If the rail is collapsed, it could be pulled then cut off and sectioned in.
You should be able to get it pulled for about 500 to 700 bucks. Labor only.
If the rail is collapsed, it could be pulled then cut off and sectioned in.
You should be able to get it pulled for about 500 to 700 bucks. Labor only.
well its goin to a shop with a frame rack. And its no even collapsed, just maby the size of your pinky on the inside of the frame rail and a little bubbled underneth. And its practically on the rear frame horns, after all the panhard bar brackets so i cant see it messing up anything structual. And i think it cracked my hatch too.
