Drag Racing Tech
Sponsored by:
Sponsored by:

Launching off the Brake - ET Street vs ET DR?

Thread Tools
 
Search this Thread
 
Old 05-13-2007 | 10:07 PM
  #1  
Loadre's Avatar
Thread Starter
Launching!
iTrader: (5)
 
Joined: Feb 2004
Posts: 226
Likes: 0
From: Kingsport, TN
Default Launching off the Brake - ET Street vs ET DR?

Has to be DOT approved. I've run the ET DRs in multiple sizes with different setups before and they always worked well, but M/T even says on their site to run the ET Street if you're launching with a manual or transbrake.

What's your opinion?

275/60/15 or 28/11.5/15
Old 05-13-2007 | 11:15 PM
  #2  
Navy David SS's Avatar
TECH Veteran
iTrader: (13)
 
Joined: Nov 2001
Posts: 4,647
Likes: 1
From: Sioux Falls, SD
Default

M/T Street DR. I'm going to be run 315-60-15's. Believe fastest DR car (a mustang) runs the same M/T

David
Old 05-14-2007 | 08:42 AM
  #3  
1320FEVER's Avatar
Banned
iTrader: (9)
 
Joined: Nov 2006
Posts: 671
Likes: 0
From: Houston
Default

Originally Posted by Loadre
Has to be DOT approved. I've run the ET DRs in multiple sizes with different setups before and they always worked well, but M/T even says on their site to run the ET Street if you're launching with a manual or transbrake.

What's your opinion?

275/60/15 or 28/11.5/15
They might be saying that because Drag Radials tend to hit your drivetrain harder than the ET Street will (due to the sidewall construction). Couple that with a transbrake and you could be forced to upgrade to a 9" soon.




All times are GMT -5. The time now is 05:00 AM.