PA Racing K-Member and Rack Issues
#1
PA Racing K-Member and Rack Issues
I have a PA Racing K member & rack on my '00 Camaro and I have noticed that the boot on the passenger side of the rack has gotten ripped.
Upon closer inspection, it appears as is the rack is not square to the K member (despite the fact the bolts are aligned correcly and there is no slop in the holes) and the rack boot is catching the lower control arm bolt since it is too far back (on the passenger side only).
Has anyone else seen similar issues (i.e. crooked rack mounts) with their PA racing setup?
Upon closer inspection, it appears as is the rack is not square to the K member (despite the fact the bolts are aligned correcly and there is no slop in the holes) and the rack boot is catching the lower control arm bolt since it is too far back (on the passenger side only).
Has anyone else seen similar issues (i.e. crooked rack mounts) with their PA racing setup?
#2
9 Second Club
iTrader: (35)
Originally Posted by BadBoo79
I have a PA Racing K member & rack on my '00 Camaro and I have noticed that the boot on the passenger side of the rack has gotten ripped.
Upon closer inspection, it appears as is the rack is not square to the K member (despite the fact the bolts are aligned correcly and there is no slop in the holes) and the rack boot is catching the lower control arm bolt since it is too far back (on the passenger side only).
Has anyone else seen similar issues (i.e. crooked rack mounts) with their PA racing setup?
Upon closer inspection, it appears as is the rack is not square to the K member (despite the fact the bolts are aligned correcly and there is no slop in the holes) and the rack boot is catching the lower control arm bolt since it is too far back (on the passenger side only).
Has anyone else seen similar issues (i.e. crooked rack mounts) with their PA racing setup?