school me on bias ply tires....please..
#1
11 Second Club
Thread Starter
iTrader: (20)
Join Date: Oct 2006
Location: Virginia
Posts: 3,131
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok i went to the track and spun both n/a passes ...1st pass was set at 18.5psi spun a little enough to wheel hop a little.....1.8 60ft...
2nd run though psi was the same spun till half track and gave up...got back to the pits and had 20 psi....i guess it gained a lil from the 2 burnouts....
3rd pass 75 shot car hooked ok....1.7 60 ft pressure was set at 15psi....is this about rite or should i run lower psi???ive got a money race on the 2nd against an 03 cobra and i need to dead hook to beat him n/a ...he dont want an n20 race.....
my setup is a 4k stall 3.73s and a mild cammed bolt on car....the tires im runnin are the non radial e/t streets....
how much tire pressure should i be using and how long of a burnout....ive raced for years but never a car this powerful.....
any advice will be greatly appreaciated.....
2nd run though psi was the same spun till half track and gave up...got back to the pits and had 20 psi....i guess it gained a lil from the 2 burnouts....
3rd pass 75 shot car hooked ok....1.7 60 ft pressure was set at 15psi....is this about rite or should i run lower psi???ive got a money race on the 2nd against an 03 cobra and i need to dead hook to beat him n/a ...he dont want an n20 race.....
my setup is a 4k stall 3.73s and a mild cammed bolt on car....the tires im runnin are the non radial e/t streets....
how much tire pressure should i be using and how long of a burnout....ive raced for years but never a car this powerful.....
any advice will be greatly appreaciated.....
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by jmill96Z
Of course he doesn't want a nitrous race. HAHA I would try to drop them to about 12 and see if they'll dead hook.