VFN fiberglass dash?
Staging Lane
Joined: Mar 2007
Posts: 72
Likes: 0
From: Finksburg, MD
One of my customers has one for sale.. He decided to stay with his stock dash.. If I get a chance I will put up some pic's for ya..
Tyson
i'd like to see some pics too. i was looking into doing that too but i want to keep a full weight and stock look also..and is it still posible to run heating ducts,prob custom one right? and i think it weights less than ten pounds saves a lot of weight
With that dash you aren't going to run the heating ducts because to have the dash solid you will have ot make some reinforcements that will definately get in the way of the duct work.
When you actually see what that dash will look like compared to the stock one, you won't bother, it's not worth the $/weight IMO.
joe van O makes one that is supposedly alot better looking/fitting, which I would believe, but it's probably a long wait/expensive. But, you get what you pay for with stuff like this.
When you actually see what that dash will look like compared to the stock one, you won't bother, it's not worth the $/weight IMO.
joe van O makes one that is supposedly alot better looking/fitting, which I would believe, but it's probably a long wait/expensive. But, you get what you pay for with stuff like this.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo With that dash you aren't going to run the heating ducts because to have the dash solid you will have ot make some reinforcements that will definately get in the way of the duct work.
When you actually see what that dash will look like compared to the stock one, you won't bother, it's not worth the $/weight IMO.
joe van O makes one that is supposedly alot better looking/fitting, which I would believe, but it's probably a long wait/expensive. But, you get what you pay for with stuff like this.
When you actually see what that dash will look like compared to the stock one, you won't bother, it's not worth the $/weight IMO.
joe van O makes one that is supposedly alot better looking/fitting, which I would believe, but it's probably a long wait/expensive. But, you get what you pay for with stuff like this.
