Cage question

Reply Subscribe

Thread Tools

Search this Thread

Dec 9, 2007 | 02:23 PM

waltsfastz

Thread Starter

11 Second Club

iTrader: (4)

Joined: Jan 2005

Posts: 1,004

Likes: 0

From: Rowletts,KY

Cage question

Im fixing to order a 10 point cage kit. I am wanting the" Over the rear seat" Rear bars that mount to the flat area over the through the rear side plastic. Will this interfear with NHRA or IHRA Inspection? Amy other opinions? Thanks

Dec 9, 2007 | 04:13 PM

RAGENZ28

TECH Addict

iTrader: (5)

Joined: Jun 2002

Posts: 2,467

Likes: 1

From: Port Hueneme, CA

Quote:

Originally Posted by waltsfastz

The over the seat bars are the ones that are bent and weld into the center behind the rear seat area.

Personally I would not get a cage with the bars than mount on the wheel tubs and go through the speaker covers in the back.

If you ever mini tub it they will be useless. It is also stronger to weld it right above the frame Plus where they are mounted it really doesn't cause you to loose any space.

I posted a photo it's just my opinion but i would get the bars that mount like this.

I really like the wolfe cage unless you're going custom bent.

Attached Thumbnails