nice job! What is the plans since I see the extra driver's bars? 
Well,cage is done
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Well,cage is done Dropped by and looked at my car.Had it done locally at DMC which does all our race cars. Work was top notch and very detailed.Should pic it up in a week or 2 and start some work on it.The car has 4500miles on the body
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
My main plan is to get it running by spring. So far I'm leaning towards a 454ci LSX with a 100+mm turbo. Figured I could torque it down the track to a low 8 run and still street drive it.
Trending Topics
Looks nice, I like the tin work, was wondering why a panhard rod on top vs. a wishbone?
That's a good idea about the motor, that is how I want to build my turbo motor, good size motor, big turbo and low rpm, 6-6500 max rpm.
That's a good idea about the motor, that is how I want to build my turbo motor, good size motor, big turbo and low rpm, 6-6500 max rpm.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Looks great...
how you planning to do your dash with the door x-bars so high?
We put mine right below the dash.
Did you get it cert'ed? I know it was recommended to not reinstall interior until after you get your sticker
how you planning to do your dash with the door x-bars so high?
We put mine right below the dash.
Did you get it cert'ed? I know it was recommended to not reinstall interior until after you get your sticker
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
It's going to be a long project.Since I started I've added 2 kids to my family.Doubt it will get done this year due to work and $$ but for sure it will be ready next season. 
no crap. its good to do everything right the first though, especially with a build like yours. when it dets done im sure itll be a beast. good luck bro
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Isn't cheap from anyone. 25.5 with added bars,subframes,wheel tubs,front bars,cut windshield area,custom hatch divider that took them 6-8hr's to do,custom fuel cell they made,wheelie bars,suspension,new tunnel ect. Let's just say labor and parts cost as much as one of these cars cost in 2000.
Joined: Dec 2001
Posts: 12,829
Likes: 30
From: Central Indiana Honors: 4th grade spelling bee contestant
Isn't cheap from anyone. 25.5 with added bars,subframes,wheel tubs,front bars,cut windshield area,custom hatch divider that took them 6-8hr's to do,custom fuel cell they made,wheelie bars,suspension,new tunnel ect. Let's just say labor and parts cost as much as one of these cars cost in 2000.
