So the aluma stars will not fit front or rear with stock brakes?

 

Rodlites, 15x4 with metrics and 15x8 with 10.5x26x15 ET streets. Took a lot of grinding but they are on

 

Click on the site in my sig to see Bogart Drag on 3's with 3.5 and 9.25's rear. They were 92 lbs lighter than 17x9.5 zr1's with 275/40/17's. Soft as hell though. DONT hit a pothole!!!!!! They are 10 or more lbs lighter than my 4-7.5 convo pro's on my SS. I like em

 

More Conv Pro in my signature.

David

 

That is correct. You might be able to grind the begeezus out of the rear caliper and put a spacer in there. But as you can see in the photo there's a 1/2" of free space back there. A hell of a lot to get rid of and space out.

As for the fronts, you would need a big *** spacer and remove a ton of front caliper material. You would be removing way too much for it to remain safe. The stock brake setup is just too big for them.

 

I just wanted to everyone thank you for the pics it helped out a lot.

Later,
Bart

 

Derty- got the alumastar pics yet??

 

Bogart D-10's.



Mark

 

I'm going to get the tires swapped to the rims today. I can pull the calipers off the front and show you what they look like. I don't have the replacement brakes yet, so you won't see those. I have the 12 bolt out of the car so I can take it to install the spool and gears. I won't have that done until next weekend. But I will post pictures of what the rims and tires look like.

 

My other Drag Rims

Click Here for Bigger Picture

 

Here are the fronts mounted


Here are the rears (they look HUGE, but they are only 28's)


I'll have them on the car towards the end of next weekend. Waiting for brakes, have to install the spool and new gears and the transmission first.

 

too , I bet those things weigh practically nothing

 

Very nice pics guys...