Drag Question
03-12-2008, 02:58 AM
#1
Registered User
Thread Starter
Join Date: Mar 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Drag Question Just curious, what does an I/H/E LS1 run on average at the dragstrip, and then what does one with those mods plus cams run on average? If the model makes a significant impact on times (obviously a vette would) let's go with an LS1 Camaro.
03-12-2008, 04:20 AM
#3
not cams... CAM. LS1 only has 1 cam.
and your IHE (lol) all depends on what IHE you have.
what intake
what heads
and I guess E = Exhaust...
What car ( ta, vette, or camaro) what transmission, what tires, the locating and racing conditions.
When I fist started posting here when I joined I asked the same questions for a 99 SS A4 with lid, lt headers, ory, and catback with drag radials would run. The most common asnwer I got was 13 flat... My car ran a 13.47, so nobody on here can tell you a very good estimate unless it's just a lucky guess. There are SO many variables it's too hard to give a good guess. I would say somewhere between 14 and 13 seconds ET lol possibly less depending on certain variables... good luck!
and your IHE (lol) all depends on what IHE you have.
what intake
what heads
and I guess E = Exhaust...
What car ( ta, vette, or camaro) what transmission, what tires, the locating and racing conditions.
When I fist started posting here when I joined I asked the same questions for a 99 SS A4 with lid, lt headers, ory, and catback with drag radials would run. The most common asnwer I got was 13 flat... My car ran a 13.47, so nobody on here can tell you a very good estimate unless it's just a lucky guess. There are SO many variables it's too hard to give a good guess. I would say somewhere between 14 and 13 seconds ET lol possibly less depending on certain variables... good luck!
03-12-2008, 10:42 AM
#5
TECH Apprentice
iTrader: (4)
Join Date: May 2006
Location: Kenefick, tx
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
My bone stock 98 camaro ran 13.7 at HRP and i have raced for years before i got the camaro.. With slicks and free mods 13.2.... Cam (LS6) stall (3200) headers (pacesetter) 12.5 .. Nitrous dry kit 11.5 at 118 mph 60 ft 1.7...
03-12-2008, 10:44 AM
#6
By I/H/E, do you mean intake/heads/exhaust? Because people don't typically do heads on an LS1 before a cam. If they did, I suppose you could see anywhere from a 13.0 to a 12.0, but typically you'll see a cam-only car (no heads) running anywhere from mid-low 12s to mid-low 11s depending on the size of the cam, M6 vs A4, and a lot of other factors.
What kind of car do you drive and why do you ask?
What kind of car do you drive and why do you ask?
03-13-2008, 11:03 AM
#7
^^He means intake/headers/exhaust ..aka bolt-ons lol
If it helps, I ran a 12.95@107.6 with just headers, Off-road Y pipe, and catback. I screwed it up so I know I could've done better.
I should run 11's with the setup in my sig.
If it helps, I ran a 12.95@107.6 with just headers, Off-road Y pipe, and catback. I screwed it up so I know I could've done better.
I should run 11's with the setup in my sig.
Trending Topics
03-14-2008, 02:28 PM
#12
11 Second Club
iTrader: (3)
Join Date: Jan 2008
Location: Aiken, SC
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
I know a guy that went 12.9 with intake/Lt's and a GMMG catback in an 01 T/A with an M6 on street tires with a broken posi.
Guessing what time your gonna run depends more on the driver than anything.
Guessing what time your gonna run depends more on the driver than anything.