but it does have power everything,else 
project dumbass (our C5 vette project)
Thread Starter
TECH Resident
Joined: Aug 2003
Posts: 835
Likes: 0
From: aiken ,sc
project dumbass (our C5 vette project) well had some time this week after finishing Big Mikes car so here's a few shot's of the c5 [sorry no pic's of what we are doing with the irs
]
the car will be built to use the stock cradle IRS set up which we'll be modifying in order to run 15 inch wheels/tires for stock suspension radial racing and it will also be set up with a 4 link, so we can put a rear in it to run limited street in orsca and top street in the ptra down here by us
]the car will be built to use the stock cradle IRS set up which we'll be modifying in order to run 15 inch wheels/tires for stock suspension radial racing and it will also be set up with a 4 link, so we can put a rear in it to run limited street in orsca and top street in the ptra down here by us
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
TECH Resident
Joined: Aug 2003
Posts: 835
Likes: 0
From: aiken ,sc
Thread Starter
TECH Resident
Joined: Aug 2003
Posts: 835
Likes: 0
From: aiken ,sc
[if it work,s all the better] and coil over,s are allowed in 99 % of the SS classes, so the car should be able to run either or by just unbolting the cradle, again the straight rear will probably be done first as ,the knuckles and shafts are like 8weeks out
Thread Starter
TECH Resident
Joined: Aug 2003
Posts: 835
Likes: 0
From: aiken ,sc